View Full Version : New cam
97cobrasvt
10-07-2007, 04:47 PM
I have ordered my cam and it is on it's way.:metal: Solid roller with a low lash. I will tell you a little about it. It is a street / strip custom grind with a 605/608 lift . I had to order a set of springs as well. Now it time to have some fun and put it all back together before MMP :jester: . Also I have some suspension parts to go on ( planning on putting the wheels up at MMP :jester: ).
QWKSNKE
10-07-2007, 06:22 PM
awesome
Any idea on what duration and lobe center will be?
97cobrasvt
10-07-2007, 06:25 PM
yes:jester: Lobe centerline is 108 and lobe seperation is 112
qkjuicedpony
10-07-2007, 08:11 PM
sounds like a cam i know of :D
97cobrasvt
10-07-2007, 08:52 PM
sounds like a cam i know of :D
If you plan on spraying then maybe:jester: . I had them set it up for the bottle more than on motor. MMP here we come:nx:
qkjuicedpony
10-08-2007, 03:28 AM
Ive already got the 250 pills in mine:D:D:D
97cobrasvt
10-08-2007, 12:53 PM
took my valve springs off and had them check to see seat pressure and max and I can use my old springs. So I can spend that money on something else :jester:
qkjuicedpony
10-08-2007, 07:45 PM
get another kit.....or two:D
97cobrasvt
10-09-2007, 01:50 PM
get another kit.....or two:D
That is the plan
coupe
10-09-2007, 03:34 PM
You guys are both gonna turn your stock blocks inside out.
But hey, Scrap is $.07 per pound right now. :jester:
qkjuicedpony
10-09-2007, 07:44 PM
You guys are both gonna turn your stock blocks inside out.
But hey, Scrap is $.07 per pound right now. :jester:
Mine was Hecho en Mexico :D:D
97cobrasvt
10-10-2007, 04:35 AM
got my cam in today and they sent me the wrong one:banghead: :banghead: :banghead:
vBulletin® v3.8.2, Copyright ©2000-2024, Jelsoft Enterprises Ltd.