PDA

View Full Version : Holset opinions.


RedSuperRanger23
01-10-2008, 02:36 PM
Is anyone on here running a Holset on your 2.3? I have a brand new H1C that I have been back and forth on using or selling. My 2.3 currently has 316,000 miles on it and I dont have time for a rebuild right now so the Holset just sits on the shelf. I know some of the Ranger 2.3T guys are but I wanted to see what your opinions of them were.

coupe
01-10-2008, 02:58 PM
Not a bad sized turbo...but kinda depends on the turbin housing on it. It may be more suited to a diesel...like most Holsets are. Pics?

RedSuperRanger23
01-10-2008, 03:01 PM
its a 16cm2 housing. Pics are HERE (http://s159.photobucket.com/albums/t154/RedSuperRanger23/H1C/)

QWKSNKE
01-10-2008, 03:06 PM
I have read up a little on Holsets but not enough to know if I would want to put one on my SVO

coupe
01-10-2008, 03:26 PM
That turbine housing is too big...the little ford motor will hang it's tongue out trying to do anything with that.
http://i159.photobucket.com/albums/t154/RedSuperRanger23/H1C/HPIM1513.jpg?t=1200003942

RedSuperRanger23
01-10-2008, 03:35 PM
I know this isnt the 5.0 section, but do you think it would run on a 5.0?

coupe
01-10-2008, 08:56 PM
Well, I don't care for the compressor side for a V8. It's too small. Kinda a catch 22. But it's great for a diesel in the 3-5 liter range. :shrug:

I've seen a Holset (HX35 IIRC) do very well on a Buick GN, but it had the turbine housing adapted from a buick GN...so, kinda a hybrid turbo.

What you need is a T3/T4 hybrid. SVOBrown has the perfect setup IMO: a 50 trim compressor and a Stage 3 turbine wheel. In an SVO .63 A/R turbine housing. It's a bolt-on turbo and they run great.

SvoBrown
01-11-2008, 05:54 PM
I've used the 60 trim and the 50. Also depends what you want to do with it. Drag race the larger will make you happy. Street and DD you want the smaller trim. Unless you have really low gears. Listen to coupe on the turbo's, he knows some stuff.

RedSuperRanger23
01-12-2008, 07:21 AM
I had planned on it being an around town cruiser/weekend bruiser. I really wanted to find an HX35 but this one came along and I got a deal on it so I figured if nothing else I could resell it. My Ranger stock came with 3.73's but its in the 7.5 and I dont plan on keeping that long when I drop the motor back in.

coupe
01-12-2008, 11:02 AM
The 7.5 will take about all a turbo 2.3 will dish out...just a heads-up to maybe divert your money elsewhere. You can get good axles for the 7.5 and the trac-loc is fine.

That HX35 worked well on the GN...but the Garrett 60-1 totally runs circles around it...in the low, mid, and upper RPM. Sell the holset.

Thanks SVOBrown.

QWKSNKE
01-12-2008, 11:58 AM
The 7.5 will take about all a turbo 2.3 will dish out...just a heads-up to maybe divert your money elsewhere. You can get good axles for the 7.5 and the trac-loc is fine.

That HX35 worked well on the GN...but the Garrett 60-1 totally runs circles around it...in the low, mid, and upper RPM. Sell the holset.

Thanks SVOBrown.

I can easily kill a 7.5 rear. :D

SvoBrown
01-12-2008, 12:42 PM
I can easily kill a 7.5 rear. :D
I tried to kill the one on the svo. It still looked new when I took it out and put in the 8.8 Drag slicks on the strip is a killer on anything. Or maybe it's just Lee.

RedSuperRanger23
01-12-2008, 12:45 PM
I think I either talked to coupe or was referred to him before on the 2.3 stuff but everytime I get it on my mind I never have the money to start. Its pretty much a long term project so Im in no rush. I just want to upgrade to an 8.8 so I dont have to worry if this launch will be my last lol.

QWKSNKE
01-12-2008, 02:25 PM
I tried to kill the one on the svo. It still looked new when I took it out and put in the 8.8 Drag slicks on the strip is a killer on anything. Or maybe it's just Lee.

The one I killed was in a in a stock 175hp 83 GT on street radials. Lost several teeth on the ring and pinion on my last pass of the day. :D

SvoBrown
01-12-2008, 02:38 PM
Must just be Lee.

coupe
01-13-2008, 02:12 PM
:lol: The V8 is not friendly on the 7.5 for sure.

coreydaniel
09-29-2008, 09:05 PM
My ranger has a 7.5 with 3.73 gears and a locker. ive ran it at the track several times with my 28x13.5 mickey thompson et streets and that thing is still holden strong. i would have thought it would have popped long ago. I actually have a narrowed 8.8 rady to go back in it, but it has been going on 3 years now on the 7.5.