PDA

View Full Version : fusible link repair question


b-blown
05-07-2008, 05:26 PM
can I use the fusible link from a donor car for the charging circuit? mine fried the alternator was pumping 14.75 volts made a temp. repair swapped alternators now its charging fine but need to fix the link

yellowSVT
05-07-2008, 05:56 PM
yes, make sure it is the same size!

EHardy1971
05-07-2008, 06:28 PM
yes, make sure it is the same size!
+1,or you can put an inline fuse in it with the same amperage rating.

b-blown
05-07-2008, 07:06 PM
ok the wire was green anybody know what amperage that is...or does it go by gauge

Dale McPeters
05-07-2008, 07:29 PM
ok the wire was green anybody know what amperage that is...or does it go by gauge

It is by gauge. Here are a few links >

http://www.autoshop101.com/forms/hweb1.pdf
http://www.whiteproducts.net/fusible_link_wire.shtml
http://www.madelectrical.com/catalog/fusible-link.shtml

b-blown
05-10-2008, 05:27 PM
thanks dale ...greatly appreciatted the links really helped someone also said I could just wire in a fuse ,,,if I was to do this what size fuse would be recomended