PDA

View Full Version : Torque box kit

blue90lx
06-05-2008, 01:16 AM
I have a upper and lower torque box kit from upr. I know that the rear seat and the rearend and all that has to come out. My ? is how hard is it to install these? Do you guys recommend welding both upper and lowers or just the uppers? Any feed back would be great. Thanks
1Quik85GT
06-05-2008, 03:40 AM
welded it alll
QWKSNKE
06-05-2008, 03:21 PM
welded it alll

+1...
sleepinggt
06-05-2008, 04:35 PM
most people just weld up all the seams on the factory brackets etc where it was just tac welded from the factory and then put some reinforcement plates on the lowers
slvrbullit
06-10-2008, 07:32 AM
I have the UPR kit and I welded up everything.
97cobrasvt
06-10-2008, 03:54 PM
I have the UPR kit and I welded up everything.



Same here, if there was a spot to weld I welded it all.
ujslost
06-15-2008, 08:30 AM
We installed these yesterday. Welding up the lowers in that small ass hole they fit in is going to be a bitch!
97cobrasvt
06-15-2008, 08:57 PM
We installed these yesterday. Welding up the lowers in that small ass hole they fit in is going to be a bitch!


Let me say YYYYYYYEEESSSSSSSS it was:jester:
blue90lx
06-15-2008, 09:15 PM
yeah that was a fun job last set i'll be doin for a while