Newest Update

[CrimsonRacing]

Finally got the new carpet in yesterday(black)

amazing how much waste there is from ACC on these carpets.

and Lee..............there was still about $1.50 in change left in there....:jester:

I'll put that towards more mods.....


on another note.........I've always had temp gauge issues since Lee and I swapped cars.Decided to purchase a new sending unit yesterday and that did not work(actually the car boiled over today when I test drove it),so I just ordered a new aluminum Radiator.

I think at some point maybe even before Lee got the car,it had stop leak put in and has gunked up the tubes.

This should end my overheating problem since everything else is new(thermostat,water pump,engine)



:metal:

[EHardy1971]

:pics:

Lets see the new carpet!

[CrimsonRacing]

Eric............I'll have some later today.........

were you at Pull a Part in Bham yesterday?


I was there looking for a window switch off that '97,but those parts were already gone.......:banghead:







:metal:

[EHardy1971]

No,I was at the one over this way in Lincoln.I do want to hit the one up over in B'ham though!

[CrimsonRacing]

No,I was at the one over this way in Lincoln.I do want to hit the one up over in B'ham though!



Birmingham has 3 Fox bodies right now or are you looking for sn-95 parts?







:metal:

[EHardy1971]

Birmingham has 3 Fox bodies right now or are you looking for sn-95 parts?
:metal:

I need a few Fox things,are any of them factory V-8 cars?

[CrimsonRacing]

I need a few Fox things,are any of them factory V-8 cars?

Not sure Eric................since mine is an sn-95,I didn't even look at them in the yard........I just accessed inventory on my pc.




:metal:

[CrimsonRacing]

:pics:

Lets see the new carpet!


5044

5045

[EHardy1971]

Interior looks outstanding! What's the website for that pull a part?

[CrimsonRacing]

Interior looks outstanding! What's the website for that pull a part?



www.pullapart.com/Inventory/Main.aspx

[banditmwp]

:nice:

[97cobrasvt]

looks good:metal:

[hevymtl]

looks good:metal:

:werd:

[Craig K.]

Richard,

When you change the radiator, also change the fan motor.
The '94 and '95's are notorious for having fans that go bad, they will still turn over, but they have so much resistance that they will not spin fast enoug. Infact there was a recall of sorts on the connector from the main harness to the fan, check that connector, most of the time it is burnt pretty bad.

I bought my motor from Auto Zone, it was a Siemens unit (an OEM supplier) and carried a lifetime warranty for about $60.

This is what had fixed my over heating issues.

Also did you ever get the odometer gears?

[militarymustang88gt]

man same scheme as in my fox! good taste with leaving the grey floor mats.

[CrimsonRacing]

Richard,

When you change the radiator, also change the fan motor.
The '94 and '95's are notorious for having fans that go bad, they will still turn over, but they have so much resistance that they will not spin fast enoug. Infact there was a recall of sorts on the connector from the main harness to the fan, check that connector, most of the time it is burnt pretty bad.

I bought my motor from Auto Zone, it was a Siemens unit (an OEM supplier) and carried a lifetime warranty for about $60.

This is what had fixed my over heating issues.

Also did you ever get the odometer gears?

Gears have been ordered Craig and should be here and installed before our vacation in July.


I burped the system today(by 04Mach1's suggestion)and the fan motor works fine(engages at about 195 degrees)........Fan is pulling a ton of air and the harness is ok as well.I'm gonna get an inexpensive(sun pro) manual gauge and mount it for the time being and monitor the engine temp. until I feel everything is ok and then I will buy a new gauge cluster.



:metal: