PDA

View Full Version : wheel stud Diameter

SlowJoe
06-11-2008, 09:13 PM
what size are mine on the 02?
TooManyMustangs
06-12-2008, 03:20 AM
1/2" joe
SlowJoe
06-12-2008, 07:29 AM
the part that presses in. i know they r 1/2" summit is showing like .612 and stuff.
SlowJoe
06-12-2008, 08:48 AM
0.625 is the knurl
TooManyMustangs
06-12-2008, 12:52 PM
k gotcha....
sleepinggt
06-12-2008, 12:59 PM
depends, front are smaller than rear

front .594"
rear .618"

you can however use the .625's(ARP#100-7703) in the rear which are much cheaper(i did) but using them in the front is very risky without using a 39/64 drill bit to enlarge the holes in the front first to keep from cracking the hub

i just used the .625's in my mosers in the rear and use moroso 710-46185 in the front