Turbo????????

[2slow4u]

Upper and Lower 93 Cobra intake, not the aftermarket, ported both, upper and lower, Iron GT-40s mild port, Edelbrock roller cam, C&L 73mm mass air, 70mm, throtle body from BBK, UPR cold air kit, shorty head man 1 5/8 headers with a Ypipes x pipe all the way to the tail pipe 2 1/2". 3.73 gears, tire are Street radials 295 50 15, recently rebuilt AOD, B&M shift kit set up by Mike Collins, and a PTC 10" converter with a 2800-3000 stall lock up converter. Just put a set of March pullies...



now wat do i have to do get to be able to run a turbo, i know that my compresions perfect for it 9 to 1... sum help would be nice i'd like for it to be turboed before ffw next year if sum stupid s@#$ doesn't happen next year..

[coupe]

You will need a turbo kit of course. Then, you will need larger injectors. Depending on your desired power, the injectors may range from 36 lb/hr up to 60 lb/hr along with either a matching MAF calibration or a custom tune (recommended).

Try "ponydown" or "bgturbo" for a cost-effective turbo-kit. They do very well and don't cost too much.

Also plan on having enough fuel pump, a nice regulator, a fuel pressure gauge to monitor, and a wideband O2 setup to keep tabs on A/F ratio. :nice:

[Craig K.]

Need more fuel, bigger pump and injectors, what are the specs on the cam?

[SphyNxXx]

you will need:

1 hairdryer
1 roll of ductape
1 box of paper clips
1 really long extension cord
1 can of WD40

[EHardy1971]

you will need:

1 hairdryer
1 roll of ductape
1 box of paper clips
1 really long extension cord
1 can of WD40
:lol:

[QWKSNKE]

keep the boost low. GT40 irons are prone to warp under boost.

[qkjuicedpony]

Ponydown turbo kit with a 70mm ebay turbo.

42 pound injectors
meter for 42's
255lph forced induction pump.


good enough for 500rwhp with your combo

[ncontt]

Ponydown turbo kit with a 70mm ebay turbo.

42 pound injectors
meter for 42's
255lph forced induction pump.


good enough for 500rwhp with your combo

:werd: