smog eliminator kit.

[95cobra]

im wanting to get rid of my smog pump when i install my procharger. its not being used anyways. my question is what do i do with the tubes that run to the back of the heads. does kit come with block off plates, or do i jus cap off tubes. ive never really messed with fords other than few cam swaps. go easy on the laughs i know how to turn a wrench just not sure about this.:headbang:

[coupe]

I found a pair of bolts that threaded into the back of the heads to plug those holes...Used some anti-seize and snugged them right up. :nice:

[95cobra]

I found a pair of bolts that threaded into the back of the heads to plug those holes...Used some anti-seize and snugged them right up. :nice:

so the holes are already threaded.

[coupe]

Yes. the holes are threaded. You will see when you get the emissions tubes off. They are attached by a smaller bolt in a hole above the actual emission port...but the port itself is indeed threaded.

[QWKSNKE]

so the holes are already threaded.

yeah they are threaded but odds are you will have to clean the threads out. The ports are you usually clogged with carbon builld up

[SkurdalenFox]

http://store.summitracing.com/partdetail.asp?autofilter=1&part=TFS-51400265&N=700+115&autoview=sku

Summit is friendly enough to also list the bolt size.

[95cobra]

thanks everyone for your help..:D