View Full Version : intake question
92 lx
08-07-2008, 10:22 PM
All right i have a 93 gt that has a stock bottom end, holley systemax 2.02 heads, and holley cam 19 lb. inj. using a nitrous express wet kit spraying 125 what i am getting at is what intake flows better the holley intakes or i have a tubular gt-40 intake might be a stupid question but just curious.Thanks for any input
Dennis
QWKSNKE
08-08-2008, 11:00 AM
Holley will be better for your combo
coupe
08-08-2008, 11:42 AM
:werd: ... but if you have a tubular GT40 already, it would work well.
EHardy1971
08-08-2008, 08:34 PM
:agree:That GT-40 lower will flow some impressive numbers with some minor port work.
QWKSNKE
08-08-2008, 08:52 PM
:agree:That GT-40 lower will flow some impressive numbers with some minor port work.
depends on what you call impressive. I removed a lot of material from my OEM cobra lower and gained nothing on my last n/a setup.
I truly believe my Cobra intake was costing me at least 15rwhp. Both Gt-40 intakes work well with boost though
92 lx
08-08-2008, 09:13 PM
Thanks for the input the car is just a little toy i crank up about once a month I ran the car once and got a 12.50 out of it on motor had the holley intakes on it that time but i have accumulated some extra parts from other projects have a 93 cobra intake and the tubular gt-40 intake do these intakes flow the same?
QWKSNKE
08-08-2008, 09:54 PM
Thanks for the input the car is just a little toy i crank up about once a month I ran the car once and got a 12.50 out of it on motor had the holley intakes on it that time but i have accumulated some extra parts from other projects have a 93 cobra intake and the tubular gt-40 intake do these intakes flow the same?
neither will flow as well as the Holley Systemax intakes.
EHardy1971
08-09-2008, 07:09 AM
depends on what you call impressive.
250 CFM?:shrug:
http://tmossporting.com/tabid/328/Default.aspx
Of course getting to the higher numbers would require getting material added to the outside of the intake runners,which is what I plan on doing to mine.I agree with you on the systemax,but just throwing this out there since he already has the GT-40.:D
89five0Gt
08-09-2008, 07:57 AM
250 CFM?:shrug:
http://tmossporting.com/tabid/328/Default.aspx
Of course getting to the higher numbers would require getting material added to the outside of the intake runners,which is what I plan on doing to mine.I agree with you on the systemax,but just throwing this out there since he already has the GT-40.:D
He already has the Holley also. And he has a cobra intake on his 92.
EHardy1971
08-09-2008, 10:43 AM
He already has the Holley also. And he has a cobra intake on his 92.
Gotcha! I did'nt know he had one already.With that being the case,it would be the best one since it's matched for his heads.:nice:
vBulletin® v3.8.2, Copyright ©2000-2024, Jelsoft Enterprises Ltd.