View Full Version : 5 lug conversion ?
blackgt50
04-01-2009, 07:15 PM
I am fixing to do a 5 lug conv.. i have been told to use pass. side ranger axles but after searching thru back threads on the site it said to use left side which one do i need?and also will explorer axles work?
SlowJoe
04-01-2009, 07:16 PM
http://streetstangs.net/showthread.php?t=4089
blackgt50
04-01-2009, 07:22 PM
thanks didnt see that site when i was seaching
EHardy1971
04-01-2009, 07:26 PM
Yeah,it's passenger side on the Aerostar axles IIRC. Just do the SN95 conversion,you'll be MUCH happier with 4 wheel discs,trust me!
Craig K.
04-05-2009, 07:48 AM
Yeah,it's passenger side on the Aerostar axles IIRC. Just do the SN95 conversion,you'll be MUCH happier with 4 wheel discs,trust me!
I would go this route too, use 94/95 front spindles, then later you can upgrade to cobra front brakes if you want (must use 17" wheels).
You can use the parts from any v-6 or v-8 too.
plus on the fronts, you get a seperate rotor/hub, meaning the bearings are not part of the rotor so you do not have to pack them.
SvoBrown
04-05-2009, 08:05 AM
I would go this route too, use 94/95 front spindles, then later you can upgrade to cobra front brakes if you want (must use 17" wheels).
You can use the parts from any v-6 or v-8 too.
plus on the fronts, you get a seperate rotor/hub, meaning the bearings are not part of the rotor so you do not have to pack them.
Big plus there.
vBulletin® v3.8.2, Copyright ©2000-2024, Jelsoft Enterprises Ltd.