wiring help

[JUICED SVT]

I need a wiring diagram for a 2001 cobra engine harness. I have done several searches and have came up empty handed. I think I am having a grounding issue after reinstalling my 4v into the gt. Is the only ground on the harness the one to the motor mount? Any help is greatly appreciated. Thanks, Jessie:chug:

[QWKSNKE]

does the harness you are talking about only go to the sensors on the intake and heads?

[rtusnake]

I know there is that one plus a couple directly to the frame of the car

[Wall96cobra]

at least make sure the body and frame are grounded to the engine. Doesn't matter if you can't figure out where the original ground wires went exactly, just make sure the ground points are clean metal.

[JUICED SVT]

ok it's the harness for the stater, alt. and ground. now i have power on the ground side of the harness......wtf? could a ground wire and a hot wire have gotten pinched together on the install an is now shorting itself out? well out to check it out. at least now i know why the ground isn't grounding just have to find where

[jah81592]

Go to www.alldatadiy.com (http://www.alldatadiy.com) you can order a subscription to the car you need and the wiring diagrams are very complete.