351 5.8 Flywheel 28 oz

[jonosranger]

Is there a stock production flywheel (or does anybody have one?) that i can buy to bolt up to my 351 with a 28oz balance for my 10.5 spec stage 3 clutch in front of my tremec 3550? Any info would be helpful. I dont want to go out and spend $500 on a flywheel. I am just looking for something that will work for now cause i have to go spend $650 on stuff for my motor.:jester: Thanks, Jonathan

[coupe]

The 351W flywheels will be 164 tooth and probably have an 11" pressure plate pattern. An early 289-302 flywheel would be the right size and balance, but it will have a pressure plate pattern for a 10" clutch.

Best bet is to get an aftermarket piece... and it isn't anywhere near $500.
I can get you one for around $220. Billet Steel, 28oz...interchangable weight so you can use it on "zero" or 50oz balance motors too.

There are cheaper ones online, but I'm not sure who makes them or how good they are.

Lemme know.

[jonosranger]

Thats wat i was thinkin. Wat Brand is that?

[EHardy1971]

I suggest picking one up from Coupe,BUT if you want to try an auto parts store,have them look one up for a '95 Cobra R.;)

[93cobra1928]

:yup: $53.99 at Advance Auto Parts