PDA

View Full Version : Fogger nozzle?

jonosranger
08-14-2009, 01:47 PM
What would yall think the best wet fogger nozzle is? Looking to buy one. Want to spray 175 to 200. If i have to i will run two foggers and two pair of solenoids thats ok too. Jus looking for opinions and or experience here. this is for my 90 coupe in my sig. I am already sprayin 125 dry zex kit on it. I want to get away from the dry.:jester::jester:
SlowJoe
08-14-2009, 02:01 PM
i say 2 kits! i think like 125 then at the 60ft add 50-75 more

2 of these nozzles and 4 noids and 2 bottles:jester:

part#CFN-1899 very bottom of page

http://www.coldfusionnitrous.com/Nozzles.aspx?CategoryID=13
QWKSNKE
08-14-2009, 02:30 PM
NX nozzle always worked well for me. I liked it better than I did the dynotune nozzle
EHardy1971
08-14-2009, 02:35 PM
NOS soft plume fogger is what I'm using,works fine.
qkjuicedpony
08-14-2009, 02:47 PM
What would yall think the best wet fogger nozzle is? Looking to buy one. Want to spray 175 to 200. If i have to i will run two foggers and two pair of solenoids thats ok too. Jus looking for opinions and or experience here. this is for my 90 coupe in my sig. I am already sprayin 125 dry zex kit on it. I want to get away from the dry.:jester::jester:



I used to run a dry kit that was nasty...dont be scared.

My dry kit would go up to 275:metal:
jonosranger
08-17-2009, 12:43 PM
I used to run a dry kit that was nasty...dont be scared.

My dry kit would go up to 275:metal:
How is that possible
qkjuicedpony
08-17-2009, 07:00 PM
How is that possible


Buy the two biggest Nitrous Solenoids you can get and then start playing with jets and fuel.

My car had a e7 headed 302 with an e cam and a performer efi intake.

Through a c4 it made 461rwhp and 568rwtq on a 200 shot and would run 6.7-6.8 in the 1/8 on drag radials.
rtusnake
08-17-2009, 07:42 PM
i say 2 kits! i think like 125 then at the 60ft add 250-275 more

2 of these nozzles and 4 noids and 2 bottles:jester:

part#CFN-1899 very bottom of page

http://www.coldfusionnitrous.com/Nozzles.aspx?CategoryID=13

That sounds better :jester:
waypastcrazy
08-18-2009, 02:39 PM
Better get a piggy back and a wide band
jonosranger
08-18-2009, 02:45 PM
Buy the two biggest Nitrous Solenoids you can get and then start playing with jets and fuel.

My car had a e7 headed 302 with an e cam and a performer efi intake.

Through a c4 it made 461rwhp and 568rwtq on a 200 shot and would run 6.7-6.8 in the 1/8 on drag radials.

That sounds better :jester:
That wat i was thinking:metal:
SMOKNSS
08-19-2009, 10:14 PM
Yo jonathan I would do the two kits since yours is a street car. Hit it with one or both kits. Makes it easier to make adjustments for traction or for those "stock" passes. LOL. Are you still planinning on going carb'd if so get a plate then a nozzle. Works great...... from what I hear.:jester: