View Full Version : Anybody here running an AFM cam?
EHardy1971
03-12-2010, 10:10 AM
I know Bandit is running one in the 'vert, and QWKSNKE had one at one time. I'm looking at a couple of their cams for the coupe, and was wondering what cam's users here were running, and what the rest of their combo was.
Dale McPeters
03-12-2010, 10:56 AM
Yes.
N61 in the 306 (Lee's old cam)
B451 in the 363 (with the blower)
If I were you I would call Rick Anderson and talk directly to him as he can make a better recommendation based on what you have as far as engine, gears, N2O etc. etc.
QWKSNKE
03-12-2010, 12:10 PM
Yes.
N61 in the 306 (Lee's old cam)
B451 in the 363 (with the blower)
If I were you I would call Rick Anderson and talk directly to him as he can make a better recommendation based on what you have as far as engine, gears, N2O etc. etc.
I agree..
I ran AFM cams in my last 2 combos before selling the car to Dale. Very good profiles in my opinion...
EHardy1971
03-12-2010, 01:33 PM
I plan on giving them a call (I'm looking at the N-21 and B-21) to see their recommendation. I know their cams are basically OTS custom grinds, and have a good reputation for performance. What were you guys running prior to the AFM cams, and was there a noticeable difference?
03slobra
03-12-2010, 03:56 PM
i have an n71 afm cam and i love it.i have a 331 with afr heads
Dale McPeters
03-14-2010, 12:15 PM
I plan on giving them a call (I'm looking at the N-21 and B-21) to see their recommendation. I know their cams are basically OTS custom grinds, and have a good reputation for performance. What were you guys running prior to the AFM cams, and was there a noticeable difference?
I had a Jay Allen grind. Not much difference for what I am using it for...z
qkjuicedpony
03-14-2010, 12:34 PM
I had an AFM B451 in my black fox body and it LOVED the 225 shot!
acproxer
03-14-2010, 08:32 PM
n-91 in my 347, tfs heads, prosystems carb, 10.5 comp. stick, 4.10 gears. best so far on a 125 shot, 10.26, 1.40 60 ft. very streetable on pump gas. hope to put it in the nines the first time out this year with a little bit larger shot. i am very satisfied with the afm cam and ron anderson is very helpfull with input. good luck, ac
chvyeter
03-28-2010, 09:05 AM
I think for OTS cams they're the best you can get or just go custom.
vBulletin® v3.8.2, Copyright ©2000-2024, Jelsoft Enterprises Ltd.