View Full Version : ARP headstud torque specs with TFS Alum. heads
ncontt
01-13-2011, 03:33 PM
numbers I'm seeing on the net say 65 ft/lbs....that seems awful low....is that what is generally accepted?
Thanks in advance....
coupe
01-13-2011, 03:59 PM
7/16" head studs, I go 70 ftlbs on all 10 of them (each head), then add another 5-10 for the center ones that are under the valvecovers. :nice:
ncontt
01-13-2011, 04:06 PM
'preciate YOU!!!
QWKSNKE
01-13-2011, 08:24 PM
Coupe sounds right
ncontt
01-21-2011, 02:59 PM
another stupid question, but do you go straight to 70 or get there in a couple stages?
jonosranger
01-21-2011, 03:38 PM
i would go about 50 first on both sides then go to 70 on both and then add the 5-10 lbs in the middle
coupe
01-21-2011, 03:56 PM
Stages... I do 30, 50, then 70 (each step on all of the bolts!).
Then go back and "click" to 80 on the middle ones (under valve-cover).
QWKSNKE
01-21-2011, 06:39 PM
Stages... I do 30, 50, then 70 (each step on all of the bolts!).
Then go back and "click" to 80 on the middle ones (under valve-cover).
+1....
ncontt
01-23-2011, 06:41 PM
cool. thanks.
vBulletin® v3.8.2, Copyright ©2000-2024, Jelsoft Enterprises Ltd.