GM 6 speed into a ford.

[H8IMPORTS]

My 92 coupe needs a trans and I know where I can get a 93 lt1 6 speed real cheap. I have heard of people putting them into fords. Does anybody know what all I would have to change? I know the bellhousing but what else? And would it be worth it?

[QWKSNKE]

driveshaft, bellhousing, crossmember, etc.

Same if you install a cobra 6-speed. They are both t-56's

[H8IMPORTS]

Where can I get a bellhousing? I guess call tremic?

[QWKSNKE]

D&D motorsports.

Pretty sure you will need a clutch fork as well

[EHardy1971]

driveshaft, bellhousing, crossmember, etc.

Same if you install a cobra 6-speed. They are both t-56's
Are the input shafts the same? I know the GM T-5 and Ford T-5 had different input shafts, and IIRC, output shafts. Different splines.

[Craig K.]

arn't the F-body transmissions at a 15 degree rotated angle or something to allow the torque arm to be bolted on?

[QWKSNKE]

Are the input shafts the same? I know the GM T-5 and Ford T-5 had different input shafts, and IIRC, output shafts. Different splines.

Could be. I didn't think about that

[rtusnake]

Gm trans are 26 spline input and hydraulic clutch. That's the main two differences off the top of my head. Not worth it to swap over imo

[H8IMPORTS]

Thanks guys but the deal fell through so I wont be swapping it over. Lol. I was going to get a parts car 93 LT1 car and I decided against it. But thanks again!