Greased Lightning II

[SlowJoe]

Well its back home again!!! So i will start a new thread. 93 lx getting a 357w unsure of heads right now. c4 with 3.73 gears. Will post more as it comes.:metal:

[SlowJoe]

thanks a million waypastcrazy (Clyde)

[waypastcrazy]

:cool::smokin:

[jonosranger]

That car looks familiar! :jester:

[yellowSVT]

good deal, i have a bbk intake for sell brand new in box with fuel rails and gaskets...

[BLOWN95GT]

Don't back out on it this time! and make sure you put lug nuts for the rearend on your parts list looks like you may need a couple. What kind of setup are you planning on running N/A, GIGGLE GAS, SUPERCHARGER, OR HAIR DRYER?

[SlowJoe]

My plans are afr 185s and a 150 shot.

[BLOWN95GT]

This thing is going to be a torque monster! Can't wait to see it finally come together.:metal:

[Doc_G]

It seems a select few of you swap cars betwixt each other quite a bit. Good thing one of you don't have an eligable sister... the posts would be WAY more interesting though. :D

[SlowJoe]

I am trying to stop swapping around! I always lose my ass!

[SlowJoe]

http://www.youtube.com/watch?v=wK63eUyk-iM

[yellowSVT]

Here we go again!

[waypastcrazy]

It seems a select few of you swap cars betwixt each other quite a bit. Good thing one of you don't have an eligable sister... the posts would be WAY more interesting though. :DAnd your point is?

[Doc_G]

And your point is?

no point, just an observation.

:fight:

[waypastcrazy]

no point, just an observation.

:fight:my observation is it's no different than any member buying,selling or trading vehicles.It is what is.

[yellowSVT]

im just glad joe got something to play with again we all will have to get together again soon lol! right clyde? joe? eric? get the point! Miss us hangin out.......

[waypastcrazy]

Yea i tried talkn him into a BB.I do have couple of BB setups.
He says sb get him rollin sooner.which is true.
And still have just as much fun.:popcorn:
I am lookn forward to some hanging out to Robbie.

[SlowJoe]

A little run down on it. 84 351 block .30 over with a small solid cam,650 dp holley,c4 with 3500 converter. Parts needed heads,intake,headers,and other odds and ends. Also have a 31 spline locker. Will need axles.

[yellowSVT]

hate a solid cam, gotta adjust all the time, sounds fun.... I have cut my work in half tired of being gone all the time after dec i should be around alot more lol.

[Doc_G]

my observation is it's no different than any member buying,selling or trading there vehicles.It is what is.

I think you misunderstood the jist of my post. It wasn't made in a negative way, more of a tongue in cheek... ah **** it.

:D:chug:

[waypastcrazy]

I think you misunderstood the jist of my post. It wasn't made in a negative way, more of a tongue in cheek... ah **** it.

:D:chug:lol its all good.
I am over my beer mixed with white lightning hangover now.:chug:

[yellowSVT]

Wow lets settle iit at the track, LOL!!!!!
Robbie

[SlowJoe]

Well plans have changed again! As always with me. looks like a few more cubes and big tube headers:jester:

[waypastcrazy]

:popcorn:

[SlowJoe]

just order 800 bucks in parts:metal: will update when they get here:jester:

[waypastcrazy]

:chug:

[SlowJoe]

a few parts came in yesterday. And more will be coming next week. Its not going to be so bad ass as i wanted. I am just going to get it running for now with a iron headed 357w.

http://i308.photobucket.com/albums/kk354/joecoupe2002/IMAG0073.jpg

http://i308.photobucket.com/albums/kk354/joecoupe2002/IMAG0074.jpg

[Doc_G]

A little run down on it. 84 351 block .30 over with a small solid cam,650 dp holley,c4 with 3500 converter. Parts needed heads,intake,headers,and other odds and ends. Also have a 31 spline locker. Will need axles.


What did you do for gauges? (speed-o and tach) Did you buy a pre-fabbed set up (a'la florida 5.0) or did you buy a set and put them in the dash? Any pics? Also who wired it up. I'm about to have to start one of these monsters and It'll be carb'd so I need some input/advice. I'm a visual guy so any pics you have would be fantastic.

[SlowJoe]

I will post as i go. I have 5" tach and fuel cell setup.

[SlowJoe]

a few more parts! shifter and fuel system.:metal:

http://i308.photobucket.com/albums/kk354/joecoupe2002/IMAG0077.jpg

http://i308.photobucket.com/albums/kk354/joecoupe2002/IMAG0076.jpg

[waypastcrazy]

hurry up!:jester:

[SlowJoe]

i am my fuel pump dont ship til the 29th :mad:

[SlowJoe]

just got motor mounts,alum drive shaft,and alternator so the build parts are complete!!!!!! SOOOOOOOOO

http://www.youtube.com/watch?v=wK63eUyk-iM

[SlowJoe]

here is some more. should start sat putting it together:banana:

http://i308.photobucket.com/albums/kk354/joecoupe2002/2005-01-0195132805.jpg

http://i308.photobucket.com/albums/kk354/joecoupe2002/2005-01-0195132740.jpg

[waypastcrazy]

dang getting close.

[SlowJoe]

http://i308.photobucket.com/albums/kk354/joecoupe2002/IMAG0087.jpg

[rtusnake]

How much longer?

[SlowJoe]

Hoping by next weekend!

[waypastcrazy]

Where is the wideband?:jester:

[SlowJoe]

Dont have one yet

[waypastcrazy]

If you get it fired up this week i guess i can loan ya mine for a little while.:)

[SlowJoe]

well here it is ready to set in. not much left on motor part! hope to take it out next sunday:banana:

and a run down on it 357w iron heads,small cam,roller rockers,unalite dizzy,under drive pulleys,single plane intake,bbk shorty headers,O/R h pipe, dynomax mufflers,650 dp carb,stock c4 with 3500 conveter,and 373 gear.

http://i308.photobucket.com/albums/kk354/joecoupe2002/IMAG0089.jpg

[ncontt]

dayam y'all don't play....I've had most of my crap laying around for YEARS..haha

[waypastcrazy]

:popcorn:

[SlowJoe]

Well the 4x4 springs are under the back. Ready for a weekend of bust ass will update later!

[SlowJoe]

This is where i got before the ice house and food took over:metal:

http://i308.photobucket.com/albums/kk354/joecoupe2002/IMAG0094.jpg

http://i308.photobucket.com/albums/kk354/joecoupe2002/IMAG0097.jpg

[jonosranger]

does it run yet

[SlowJoe]

Still like some work!

[waypastcrazy]

Gettn close i see!

[SlowJoe]

Yup!!!!! Lots of work left. It will get there. Between the beer and steaks idk what to do.

[SlowJoe]

calling it a day! got alot done i only like wiring and exhaust to be able to bust it off.

http://i308.photobucket.com/albums/kk354/joecoupe2002/IMAG0099.jpg

[SlowJoe]

its ready but has a bad dizzy cap. and lots of cleaning up:chug:

[waypastcrazy]

You are not pullin all nighters!
What's wrong with you?

[rtusnake]

You are not pullin all nighters!
What's wrong with you?

This :baby:

[waypastcrazy]

This :baby::rofl:

[SlowJoe]

It will get there give it time!:popcorn:

[jonosranger]

I think he has gotten lazy on us!

[SlowJoe]

Waiting on fedex and drinki:chug:ng beer!

[SlowJoe]

Got to have a high tq starter this stock one is not cutting it!

[SlowJoe]

I am junking this this mallory stuff! It will be a few weeks folks!

[SlowJoe]

I have the msd in hand!!!! Thanks clyde! Getting the wedding over then its game on!

[yellowSVT]

still waiting hope all is well.......