RedSuperRanger23
02-10-2012, 12:53 AM
Ok... so, call me a ricer, I was changing out my front turn signals with LED's while I was installing the new headlight housings and HID's on the GT. I also got the Solid State Relay that they sell to replace the factory flasher module and I now have non-functioning front signals/markers. I took the new flasher relay/module out and installed the factory one with the same results. I did notice that the factory flasher relay/module has a small pin in one of the corners, but besides that, there is no difference to the pins on the flasher relay/modules. The SS Relay was supposed to fix the problem, but so far it's not helping... any ideas?