PDA

View Full Version : Terminator halfshafts

QWKSNKE
10-12-2012, 07:02 PM
Anybody know if 03-04 halfshafts will swap into a 01 cobra with no other changes?
May need one for the wife's car and none are avail by any retailer
BIGDATOWN
10-12-2012, 07:32 PM
I'm 99% sure they will. Mainly because 01-03-04 are 31 spline and 99 is 28 spline.
QWKSNKE
10-12-2012, 07:35 PM
Yeah. My biggest concern is whether the hub splines are the same
rtusnake
10-12-2012, 10:31 PM
Hub splines and bearings are the same. Direct swap
rtusnake
10-12-2012, 10:33 PM
Btw the 03 axle is stronger than the 01 but will still work
QWKSNKE
10-13-2012, 01:49 PM
Cool. I started to call you yesterday to ask but i no longer have your number...
rtusnake
10-14-2012, 12:27 AM
I'll put it in the rolodex
QWKSNKE
10-14-2012, 06:09 PM
BTW... Halfshaft prices are crazzzzy
yellowSVT
10-14-2012, 06:13 PM
hey did advance have them i get 10%
rtusnake
10-14-2012, 08:19 PM
$150 is a good going price
QWKSNKE
10-20-2012, 06:41 PM
$150 is a good going price

Cheapest i found was 368 per shaft. (ford)

I have to buy some. Apparently they are leaking from the seal by the hub bearing and not the boot like i thought