PDA

View Full Version : 2016 Camaro SS


EZ SPEED
04-07-2016, 03:37 AM
I traded my 2009 Corvette Z06 in last week. Bought this 2016 Camaro SS. GM really did a nice job on the 6th generation Camaro. ALL new everything and lighter than the 2010-2015 5th gen cars.
I went out of my normal and got a white car instead of my usual red or dark colors and I also got the 8 speed automatic instead of a 6 speed manual.

I have almost 400 miles on it now and enjoying it very much.

going to keep this one VERY STOCK as far as powertrain goes. I need to keep the warranty intact on this one !!!!

but I will of course be doing some cosmetic mods and give it my personal touch.

here is a pic from last Wednesday March 30th when I bought it.

rtusnake
04-07-2016, 04:19 AM
Going to keep it stock :jester:

EZ SPEED
04-07-2016, 11:00 AM
Going to keep it stock :jester:

LOL, well look at the Vette, I did a lot of cosmetic mods...But the only thing I did was ported heads (to correct a factory dropping valve defect so I didn't have to replace the $15,000 engine if it dropped a valve) a tune and I build a custom muffler setup.

Sooooo it is possible for me to keep the powertrain completely stock... I hope..LMAO

EZ SPEED
04-08-2016, 06:48 AM
I plasti-dipped the wheels, front bowtie, and a strip between the tail lights before I even had the car 24 hours :jester:

rtusnake
04-08-2016, 06:05 PM
Front end looks better on the new models

QWKSNKE
04-09-2016, 05:24 PM
Man, not that it looks bad with the plastidip wheels but it looked really good with the Polish finish against the white

EZ SPEED
04-12-2016, 06:40 AM
I agree Lee, but im a black wheel kinda guy. lol

Now the car has 1.5" lowering springs new alignment and smoked sidemarkers. Going to get the windows tinted today :banana:

Tom Yancy
04-15-2016, 12:53 PM
Nice ride!!!!

EZ SPEED
04-18-2016, 06:58 AM
Nice ride!!!!

Thanks!

coupe
04-18-2016, 09:31 AM
Curious if you've thought about aftermarket wheels? I think it makes all the difference with the new Camaros.

http://www.camaro6.com/forums/attachment.php?attachmentid=766747&stc=1&d=1452581905



I know it's the older year, but:

http://blog.modbargains.com/wp-content/uploads/2015/08/Chevrolet-Camaro-HRE-FF01-Tarmac-IMG001.jpg

http://i1.wp.com/blog.modbargains.com/wp-content/uploads/2015/09/Camaro_SS_VMR_V710_GM_BlueCamaro-4.jpg

EZ SPEED
04-19-2016, 06:49 AM
Curious if you've thought about aftermarket wheels? I think it makes all the difference with the new Camaros.



I would love to eventually, but I am still struggling financially right now from my divorce back in November. I removed a lot of the aftermarket stuff from my Z06 and sold that stuff...that's how I am able to do the cosmetic mods that I have done so far to the SS.

Wheels and tires are not in the budget for a while, maybe after I sell my house I can. I would really like to put the same ones I had on my 2010 SS. TSW Nurburgring Wheels Matte Gunmetal 22x9 front –22x10.5 rear

EZ SPEED
08-04-2016, 10:53 AM
Well I got a couple of bills under control and decided to go ahead and get the wheels that i have had my eye on for a while.

they are 2014 - 2015 Camaro Z28 wheels, Graphite color 20x10 front 20x11 rear with Mickey Thompson Street Comp 275/35 front and 305/35 rears.

This wheel and tire combo is 1.5" wider front and rear than what came on the car. original was 245 fronts and 275 rears. Pics dont do it justice, it looks much better in person and much more aggressive looking with the extra width.:banana:

http://i994.photobucket.com/albums/af67/ezsz06/DSC_6929_zpsib27sqpv.jpg (http://s994.photobucket.com/user/ezsz06/media/DSC_6929_zpsib27sqpv.jpg.html)

rtusnake
08-04-2016, 08:28 PM
Those look pretty good. You still working at Honeywell?

EZ SPEED
08-05-2016, 03:42 AM
http://i994.photobucket.com/albums/af67/ezsz06/DSC_6956_zpsatr6vmbz.jpg (http://s994.photobucket.com/user/ezsz06/media/DSC_6956_zpsatr6vmbz.jpg.html)

http://i994.photobucket.com/albums/af67/ezsz06/DSC_6950_zpsvslfvadq.jpg (http://s994.photobucket.com/user/ezsz06/media/DSC_6950_zpsvslfvadq.jpg.html)

http://i994.photobucket.com/albums/af67/ezsz06/DSC_6939_zpsle6o8r1g.jpg (http://s994.photobucket.com/user/ezsz06/media/DSC_6939_zpsle6o8r1g.jpg.html)

http://i994.photobucket.com/albums/af67/ezsz06/DSC_6937_zpsafwrge9p.jpg (http://s994.photobucket.com/user/ezsz06/media/DSC_6937_zpsafwrge9p.jpg.html)

http://i994.photobucket.com/albums/af67/ezsz06/DSC_6934_zpss4agnaud.jpg (http://s994.photobucket.com/user/ezsz06/media/DSC_6934_zpss4agnaud.jpg.html)

http://i994.photobucket.com/albums/af67/ezsz06/DSC_6933_zpsjx8xkfkt.jpg (http://s994.photobucket.com/user/ezsz06/media/DSC_6933_zpsjx8xkfkt.jpg.html)

EZ SPEED
08-05-2016, 03:43 AM
Those look pretty good. You still working at Honeywell?

Thanks !! oh yeah, been at Honeywell for a little over 23 years

1sicklx
08-05-2016, 08:10 AM
Man, not that it looks bad with the plastidip wheels but it looked really good with the Polish finish against the white

:werd:

qkjuicedpony
08-06-2016, 06:07 AM
Like the new wheels.

04350Z
08-07-2016, 06:57 AM
Looks good Eric

EZ SPEED
08-08-2016, 06:57 AM
Like the new wheels.

Looks good Eric

Thanks guys!! cant do any speed mods so have to make it look as good as i can..lol

04350Z
08-08-2016, 10:05 AM
The new ss isnt no slouch Eric.

coupe
08-08-2016, 03:47 PM
Muuuuch better! Looks very clean yet mean! :nice:

EZ SPEED
08-09-2016, 12:09 PM
Muuuuch better! Looks very clean yet mean! :nice:

Thanks man !!!! :metal:

EZ SPEED
08-24-2016, 10:41 AM
since its my thread....im going to be a pic whore :jester:

http://i994.photobucket.com/albums/af67/ezsz06/DSC_7055_zpssdsggoe0.jpg (http://s994.photobucket.com/user/ezsz06/media/DSC_7055_zpssdsggoe0.jpg.html)

http://i994.photobucket.com/albums/af67/ezsz06/DSC_7049_zpshcjvcypa.jpg (http://s994.photobucket.com/user/ezsz06/media/DSC_7049_zpshcjvcypa.jpg.html)

http://i994.photobucket.com/albums/af67/ezsz06/DSC_7042_zpszk6cq7au.jpg (http://s994.photobucket.com/user/ezsz06/media/DSC_7042_zpszk6cq7au.jpg.html)

http://i994.photobucket.com/albums/af67/ezsz06/DSC_7018_zps0fk0wkpo.jpg (http://s994.photobucket.com/user/ezsz06/media/DSC_7018_zps0fk0wkpo.jpg.html)

http://i994.photobucket.com/albums/af67/ezsz06/DSC_7034_zpshzyvg62z.jpg (http://s994.photobucket.com/user/ezsz06/media/DSC_7034_zpshzyvg62z.jpg.html)

1sicklx
08-25-2016, 11:50 AM
Very clean car ... Have you considered losing the wing?

EZ SPEED
08-27-2016, 03:41 AM
Very clean car ... Have you considered losing the wing?

Thanks! nope, no plans to do a wing delete at this time.

EZ SPEED
03-07-2017, 04:32 AM
Before:

https://c1.staticflickr.com/1/686/32459988324_5ffaecd8c4_b.jpg

EZ SPEED
03-07-2017, 04:34 AM
AFTER:

Atlanta Custom Wraps did an amazing job on my car. I had them wrap it in Satin Pearl Nero with Satin Carbon Fiber wrapped roof.
Its like having a new car again.

https://www.instagram.com/atlantacustomwraps/

https://c2.staticflickr.com/4/3667/32488039493_2e32dbef72_b.jpg

https://c2.staticflickr.com/4/3853/33147034562_9b6ca06c8a_b.jpg

https://c1.staticflickr.com/3/2841/33302504865_42d04bc1b4_b.jpg

https://c2.staticflickr.com/4/3883/32919869120_88609d224f_b.jpg

rtusnake
03-07-2017, 10:11 AM
How much did it cost to wrap it?

EZ SPEED
03-09-2017, 04:39 AM
how much did it cost to wrap it?

$2500

04350Z
03-17-2017, 08:49 PM
Looks badass Eric.

EZ SPEED
03-20-2017, 06:39 AM
thanks :chug:

EZ SPEED
05-16-2017, 10:07 AM
Changed out the rear spoiler to an Anderson Composites carbon fiber spoiler with a carbon fiber wicker bill.
Also installed some Oracle “concept style” LED side marker lights.

http://i.imgur.com/ME24MNuh.jpg

http://i.imgur.com/jW9gSoKh.jpg

http://i.imgur.com/ME24MNuh.jpg

http://i.imgur.com/e3VM0Hkh.jpg

http://i.imgur.com/9i7riQth.jpg

rtusnake
05-16-2017, 10:24 AM
Nice, what's the weight on the spoiler?

1sicklx
05-16-2017, 10:27 PM
You finally have a vehicle that looks better than the red lightning did. Very clean and mean.

EZ SPEED
05-17-2017, 03:36 AM
Nice, what's the weight on the spoiler?

not sure, its much bigger than the stock spoiler so the weight is prob about the same as the stock one.

You finally have a vehicle that looks better than the red lightning did. Very clean and mean.

thanks man!

EZ SPEED
06-20-2017, 10:28 AM
I was working at Vengeanace Racing a couple of weeks ago and just thought this was a cool pic.

http://i.imgur.com/4OYSqn2h.jpg

rtusnake
06-20-2017, 11:33 AM
Working?

EZ SPEED
06-21-2017, 10:39 AM
Working?

Yeah I went to work at VR for a week to see how well i like it. The owner has been trying to get me to come work for him for about 5 years now.

rtusnake
06-21-2017, 02:05 PM
How you liking it so far?

EZ SPEED
06-22-2017, 04:14 AM
How you liking it so far?

Awesome place to work for, very organized, scheduled, clean, professional, and they build the most awesome LSX and LTX vehicles in the country.

EZ SPEED
07-12-2017, 10:58 AM
Added a new front splitter this week. Its a exact replica of the Camaro 1LE splitter. Hopefully get the bowtie delete upper grille and side rockers in a couple of months. And maybe one day I can get the hood I want but its EXPENSIVE

http://i.imgur.com/gkCi7zvh.jpg

slvrbullit
07-17-2017, 01:52 PM
Looks good, really like the wrap.

EZ SPEED
07-19-2017, 03:48 AM
Looks good, really like the wrap.

Thanks :nice:

EZ SPEED
02-19-2018, 07:01 AM
I installed my new MP Concepts side rockers and put my Z28 wheels back on ( I was running the stockers for a while )
I cant say it was fun installing them in the dirt and getting rained on, i miss having a shop and a lift..but oh well..lol

Now just waiting for my Anderson Composites hood to arrive and my exterior mods will just about be finished up.

http://i.imgur.com/HMGysiJh.jpg (https://imgur.com/HMGysiJ)

EZ SPEED
03-15-2018, 07:04 AM
Finally got my Anderson Composites full carbon fiber hood yesterday !! Installed it as soon as I got home.

Here are some quick crappy cell phone pics I took till I can take better ones.

http://i.imgur.com/uUT1gpkh.jpg (https://imgur.com/uUT1gpk)

http://i.imgur.com/HGlxX59h.jpg (https://imgur.com/HGlxX59)

http://i.imgur.com/TBkSTSjh.jpg (https://imgur.com/TBkSTSj)

rtusnake
03-15-2018, 07:10 PM
Looks good, how much weight it save over the stock one?

EZ SPEED
03-16-2018, 10:29 AM
Looks good, how much weight it save over the stock one?

Thanks! Its about 6 pounds lighter than the factory aluminum hood

EZ SPEED
05-09-2018, 07:00 AM
finally got a decent pic of my car with all the mods and halfway clean. I daily drive it so its dirty most of the time..LOL

http://i.imgur.com/n35bD8zh.jpg (https://imgur.com/n35bD8z)

Italian LX
05-09-2018, 09:12 AM
Very nice!!! :metal:

EZ SPEED
05-09-2018, 10:32 AM
Very nice!!! :metal:

thanks!! :chug:

QWKSNKE
05-09-2018, 12:58 PM
I saw you on the bypass in it a weekend ago. Probably on your way home from work

EZ SPEED
05-10-2018, 06:05 AM
I saw you on the bypass in it a weekend ago. Probably on your way home from work

yeah most likely :chug:

EZ SPEED
09-30-2019, 12:17 PM
My 2016 Camaro SS got totalled in Anniston last monday. :puke:

I will post pics later

rtusnake
09-30-2019, 07:13 PM
That sucks, what happened? You ok?

EZ SPEED
10-01-2019, 06:59 AM
http://i.imgur.com/r7APksBl.jpg?2 (https://imgur.com/r7APksB)

http://i.imgur.com/A1bLaDEl.jpg (https://imgur.com/A1bLaDE)

EZ SPEED
10-01-2019, 07:01 AM
yeah , I got banged up a little. all side curtain airbags deployed.

A speeding Tahoe hit me on the pass side and knocked me into a car sitting at a stop sign.

rtusnake
10-01-2019, 06:45 PM
Took a hard hit there. Glad it wasn’t worse. What’s the replacement plan?

EZ SPEED
10-02-2019, 06:03 AM
Took a hard hit there. Glad it wasn’t worse. What’s the replacement plan?

thanks man!

I bought a 2019 Camaro SS with the 2 SS package last friday. :)
cheaper payment, longer warranty, so maybe this was a blessing in disguise.

Im supposed to be getting all my custom parts back off the 16 any day now. and they all fit the 19.

I will start a new thread for it.