Italian...Data Q

[QWKSNKE]

Explain to KB Zilla on here what that Data Q thing does that you bought

[Italian LX]

It basically takes up to 4 channels of analog signals (-5v to +5v) and puts them into digital form on a serial data line to be used on your computer. The one I have plugs into a computer's COM port (DB9 connector). They also make one for a USB port; however, I don't think it can work with the TwEECer as of yet.

When you have a DataQ, The TwEECer software is setup to log two additional parameters via the DataQ input. You can wire your wideband to one of the DataQ channels and a boost sensor to another channel.

[QWKSNKE]

I was thinking that was suppose to be used in conjunction with a GM 3 bar MAP to datalog boost

[Italian LX]

I was thinking that was suppose to be used in conjunction with a GM 3 bar MAP to datalog boost
That's what I said... I just didn't go into any detail. You're question wasn't that specific. :shrug:

You can wire your wideband to one of the DataQ channels and a boost sensor to another channel.

[Disney Lincoln]

You can also datalog a WB02 via the EGR wiring with the TwEECer solftware.

[Italian LX]

You can also datalog a WB02 via the EGR wiring with the TwEECer solftware.
Yeah, but that takes up one of your 16 logging parameters. If yu use the dataQ for your wideband, you actually get 17 parameters to log. :nice:

[Sendero]

16? I only get 10. :(