PDA

View Full Version : Does TwEECer support...

coupe
08-12-2005, 02:49 PM
low impedence injectors? Is there a way to drive them via tweecer? I'm specifically curious to what the max/min pulse-width values could be?
:D Thanks :nice:
QWKSNKE
08-12-2005, 02:58 PM
No i don't believe so
boss96
08-13-2005, 07:31 AM
It's a hardware problem, not the tweecer, the stock eec can't drive low imp injectors without damage. There is a company called "acceleronics" I think that makes an adaptor to run the injectors and works on any car.
Bob
boss96
08-13-2005, 07:34 AM
Found it.
http://www.acceleronics.com
QWKSNKE
08-13-2005, 10:42 AM
Bob, I take it that the Tweecer can be used in conjunction with this.

Also they claim that all injectors that are larger than 55's are low impedance. I have never heard that. Does this mean my Sieman 60's are low imp instead of high imp.
boss96
08-13-2005, 11:56 AM
Yes, the tweecer will work with it. It's true that most injectors bigger than 50's are low imp, but now there are 60's available in high imp. so I'm pretty sure yours are ok.
BTW, when you put those 60's in the car you will probably find the car runs really rich and changing inj slopes will not be enough. Use the "batt inj comp volt" function to correct this by reducing the numbers in the function.
Bob