PDA

View Full Version : cam questions again

jwillburn119
08-13-2005, 05:31 PM
Markings on the end of cam are Z 002. Casting in the side of cam is CWC EP 52 with a purple paint dot.

does anyone know if this is the right cam for a 5.0 HO?
jwillburn119
08-14-2005, 02:23 PM
can i use stock (rebuilt) valvetrain with this much lift and duration?



Cam Lift .320 Int .320 Exh, Valve Lift .512 Int. .512 Exh, Lobe Center 107 Int 111 Exh, Adv Dur 292 Int 292 Exh, .050 Dur 230 Int 230 Exh,
QWKSNKE
08-14-2005, 05:07 PM
wouldn't hurt to have new springs
qkjuicedpony
08-14-2005, 05:13 PM
you will need new springs.....the stockers will float in the upper rpms with that cam
jwillburn119
08-14-2005, 05:17 PM
thats kind of what i figured...
i dont have to worry about tapping the valves though?

i have 250 psi beehives on it... it will float still?
uvbnhad
08-14-2005, 05:21 PM
what kinda of rockers are you going to be using?
coupe
08-14-2005, 06:26 PM
Man; that cam has a lobe separation angle of 109º probably better suited to a carburetor car. And it wll definitely lope. I would not recommend it for a street car.
Are you looking for a stock cam still?
jwillburn119
08-15-2005, 05:45 PM
yeah i definately am... i need one, or close to stock...
i want to use "stock", or close to stock rockers... and "stock" (or 250psi springs...)
thats what i got for "STOCK"

if i can have a stock cam... it will be great... the guy that i was working with went AWOL and left me high and dry... so my car is parked in the middle of nowhere... and i am just trying to get it minimal so i can get it back on the road... that way i can finish it up

i got alot of nice stuff... but i couldnt finish the buildup with no notice... so i am scrambling
i am down a cam, 1 main bolt, and tools to put it back together... (he took them with him by accident i guess) i got the tools covered and the main bolt... im just trying to find a cam
Shankin
08-15-2005, 06:04 PM
For a stock car its hard to beat the lunati 51014. It sounds killer and performs well!
qkjuicedpony
08-15-2005, 06:10 PM
i have a stock cam if you need one...let me know
coupe
08-15-2005, 08:19 PM
For a stock car its hard to beat the lunati 51014. It sounds killer and performs well!

Yes; But springs would be in order for stock heads with it.
Or just go 51017 :evil: It's pretty bad for off-the-shelf.
jwillburn119
08-15-2005, 08:41 PM
would a cam for a 93 be the same for the 94-95 5.0?
i am pretty sure that they are the same... but people are telling me otherwise
Disney Lincoln
08-15-2005, 09:59 PM
Close enough. You'll never tell a difference.
QWKSNKE
08-16-2005, 04:55 AM
Close enough. You'll never tell a difference.


:werd:
86GT
08-16-2005, 01:24 PM
The cam for the 93 is the same as the cam for the 94-95. They have the same profile but different partnumbers.

The 93 cobra and 94-95 cobra have the same cam profile and part number
jwillburn119
08-16-2005, 05:33 PM
i thought so thanks guys... :chug: