PDA

View Full Version : New Dyno Numbers 03L

EZ SPEED
08-15-2005, 09:08 PM
Went to Walker Dynotune today to work on my tune.

Thanks to Doug904 for giving up his whole day to help me tune my 03L :chug:

The peak numbers were much less than I expected, but the power and torque curves are more than make up for the peaks.

Here is a quicky screen shot from runviewer. Sorry for the crappy pic

just in case you cant see it:

515/553 on 15 psi (last dyno was 451/5xx on 16 psi) (I will have to double check the old numbers tomorrow)

529/615 on 20 psi (last dyno was 503/587 on 20psi)

the 20 psi pull today should have been 21-22 psi but I was geting a little belt slip

http://www.myweb.cableone.net/sixspdz28/03ldyno1.jpg
QWKSNKE
08-16-2005, 04:57 AM
Nice :nice:
banditmwp
08-16-2005, 05:18 AM
:nice:
93Cobra#2771
08-16-2005, 07:15 AM
Very Nice!

Man, those torque numbers are awesome! Must feel like a damn freight train taking off. So how about a refresher on the mods, and what was different from you last dyno run?
coupe
08-16-2005, 08:06 AM
:eek2: nice.
Wicked
08-16-2005, 10:23 AM
Very Nice!

Man, those torque numbers are awesome! Must feel like a damn freight train taking off. So how about a refresher on the mods, and what was different from you last dyno run?


:hmm:

That'd be a fast freight train. :jester:
Shorty
08-16-2005, 11:04 AM
The peak numbers were much less than I expected, but the power and torque curves are more than make up for the peaks.

:agree: very nice.
hevymtl
08-16-2005, 12:56 PM
:nice: nice torque numbers!
86GT
08-16-2005, 01:29 PM
nice nice nice
TheJeanyus
08-17-2005, 12:42 PM
:metal:
J-ville4.6
08-18-2005, 07:13 PM
:metal: :metal:
natedawgg94
08-24-2005, 02:30 PM
getting much better to bad about the belt slippage still awesome #'s though
hevymtl
08-24-2005, 06:15 PM
Even with the extra belt tensioner you were getting slippage?? :shrug:
EZ SPEED
08-25-2005, 04:03 AM
Even with the extra belt tensioner you were getting slippage?? :shrug:

I went from a 3.25 to a 2.50 pulley using the same belt, I would need a smaller belt or remove the 90mm idler pulley and install a 100mm when going to that small of a pulley.

Idealy, I should step up to a larger lower pulley (from a 6# to a 8#), but I am not worried about it....it is only gonna be supercharged for about 2-3 more months.....:jester:
Scothew
08-25-2005, 07:15 AM
congrats Eric. I know all that work musta had you itching to get it on the dyno.
EZ SPEED
08-25-2005, 09:56 AM
congrats Eric. I know all that work musta had you itching to get it on the dyno.


Thanks, Scott.....yeah I kept changing stuff, then I never had time to get it on the rollers. I finally found a good stopping point ...for now ;)
TheJeanyus
08-25-2005, 11:52 AM
...it is only gonna be supercharged for about 2-3 more months.....:jester:
:turbo:?

:metal:
EZ SPEED
08-25-2005, 12:15 PM
:turbo:?

:metal:

:yup:

PTK is coming out with a kit very shortly, I hope to have the kit by the end of December/ first of January. Hope to put down 700rwhp with the T76 GTS.

BUT......the 93L is getting boost before that, two more weeks and all my parts will be here ;)
TheJeanyus
08-25-2005, 01:04 PM
:yup:

PTK is coming out with a kit very shortly, I hope to have the kit by the end of December/ first of January. Hope to put down 700rwhp with the T76 GTS.

BUT......the 93L is getting boost before that, two more weeks and all my parts will be here ;)
:lookatme: :jester:

That's going to make a pair of trucks that already kick ass kick WAY more ass. :metal:
SthrnDaizey
08-25-2005, 01:12 PM
:werd:

Couldn't have said it better myself!

:nice: Eric!
ChipR4cam
08-25-2005, 02:13 PM
Dang Eric, this is getting crazy. "I own TWO turbo Lightnings." You might be the only person able to say that.


BTW If you give me the KB, I promise to find a way to make it fit my car.:D
93Cobra#2771
08-25-2005, 02:19 PM
Holy crap, TWO turbo'd L's? Could you adopt me, please? :D
hevymtl
08-25-2005, 05:57 PM
You gonna sell the KB?
EZ SPEED
08-26-2005, 04:05 AM
You gonna sell the KB?

Yep, come November all this will be for sale:
(some people already have dibs on some of this stuff if they have their money ready)

Kenne Bell Polished Supercharger with pulley tool, oil, and choice of one pulley
Dynatech Longtube Headers, midpipes, and high flow cats
JLP Sheetmetal Upper Plenum
Electric fan setup
Custom Intake /C&L elbow w/ MAC 95mm Air tube and Filter plus silicone couplers
KB pulley 3.50
KB pulley 3.25
KB pulley 3.00
KB pulley 2.75
KB pulley 2.50
Metco Lower pulley and hub with belt
Metco Idler assembly
Stock Ford Idler assembly with pulleys
Shorty
08-26-2005, 12:15 PM
:shake:
QWKSNKE
08-26-2005, 12:25 PM
Yep, come November all this will be for sale:
(some people already have dibs on some of this stuff if they have their money ready)

Kenne Bell Polished Supercharger with pulley tool, oil, and choice of one pulley
Dynatech Longtube Headers, midpipes, and high flow cats
JLP Sheetmetal Upper Plenum
Electric fan setup
Custom Intake /C&L elbow w/ MAC 95mm Air tube and Filter plus silicone couplers
KB pulley 3.50
KB pulley 3.25
KB pulley 3.00
KB pulley 2.75
KB pulley 2.50
Metco Lower pulley and hub with belt
Metco Idler assembly
Stock Ford Idler assembly with pulleys

:hmm:
I think I should put all of this on Shelly's car :D
Shorty
08-26-2005, 02:28 PM
i think i will buy a F150 4x4 and have one heck of a surprise for some people. :D
hevymtl
08-26-2005, 05:41 PM
Can you PM me some prices?
EZ SPEED
08-27-2005, 03:05 AM
Can you PM me some prices?

:yup: