PDA

View Full Version : 03 cobra ?s


rtusnake
08-27-2005, 04:30 PM
Don't the 03 cobras come with 90mm idlers? If so are they 8rib or 6rib ones?

Wall96cobra
08-27-2005, 05:31 PM
not sure of the size but they are 8-rib setups

rtusnake
08-27-2005, 11:19 PM
This belt slip is aggrevating. Turbos would be so much better

Skillet
08-28-2005, 12:02 PM
This belt slip is aggrevating. Turbos would be so much better



:metal: :metal:

Wall96cobra
08-28-2005, 04:32 PM
This belt slip is aggrevating. Turbos would be so much better




:werd: when I build another car it will have turbo(s) on it.

mj_8
09-16-2005, 08:51 PM
I have a 2.76 upper and don't have any belt slip. I have one Metco 100mm idler but that is it. Keep in mind the EATON losses its efficiency up top, don't mistake the boost loss as slip all the time, sometimes the EATON is just not very efficient up top.

Getting it ported will cut down on this alot.

rtusnake
09-16-2005, 11:20 PM
I don't have an 03 myself. I was going to try to buy the bigger idlers to take up the slack in my car to stop the belt slip. I have a vortech. They wouldn't work though.

broke
10-24-2005, 11:27 PM
www.billetflow.com sells alot of idlers, he can custom make as well.