Mass Air tube question..

[Brutal87]

I have a C&L 73mm Mass Air meter. When I bought the car I thought it had 24lber's.. It doesnt.. :( How can I find out if the tube is for 19lb or 24lb injectors?

http://i8.photobucket.com/albums/a27/HazePerformance/Mustang%20Teardown/cnltube.jpg

Thanks
Carl :chug:

[Italian LX]

There should be a color code on it. It may be on the top of the tube so you'll robably have to take it off the body to see the stripe.

[Brutal87]

There should be a color code on it. It may be on the top of the tube so you'll robably have to take it off the body to see the stripe.

I take it that if there is no stripe.. Is a stock tube?

http://i8.photobucket.com/albums/a27/HazePerformance/Mustang%20Teardown/tubetb.jpg
http://i8.photobucket.com/albums/a27/HazePerformance/massair.jpg
http://i8.photobucket.com/albums/a27/HazePerformance/massair2.jpg

BTW.. Thanks :chug:

[slvrbullit]

C&L's utilize the stock electronics and use the tube to sample at different rates. The stripe should be on the side of the tube, atleast that is where mine were. You can call c&l and they will tell you to measure it if you are unsure or just buy a new tube that you know will be right for like $30.

[Italian LX]

I take it that if there is no stripe.. Is a stock tube?
Actually, that spot that looks like clearcoat is the indicator. You have a "clear" tube witch is a 19# calibration in the 73mm MAF. :nice:

[Dale McPeters]

I have a C&L 73mm Mass Air meter. When I bought the car I thought it had 24lber's.. It doesnt.. :( How can I find out if the tube is for 19lb or 24lb injectors?

Thanks
Carl :chug:

Here is a link that you might find useful

http://eectuning.org/forums/viewtopic.php?t=5353

[Brutal87]

Thanks... :chug: