PDA

View Full Version : Maganflow vs. Bassani


torched04
01-18-2006, 03:04 PM
Which cat back do you guys think would sound better? A maganflow or bassani? I want to find one with straight cut tips but haven't had much luck. I've been told that the maganflow has them but I can't tell from the pics I've seen. Thanks

uvbnhad
01-18-2006, 03:07 PM
Magnaflow sucks. Of those two, go with the Bassani but be ready to pay for it.

torched04
01-18-2006, 03:13 PM
Which catback kicks ass then? I wanna have a deeeeeep mean and clean sound without using flowmasters. Pretty much every GT I encounter has flows.

TheJeanyus
01-18-2006, 03:22 PM
Borla Stingers. :yup:

QWKSNKE
01-18-2006, 03:35 PM
yeah the Borla Stingers sound good but be prepared to wake the dead when cruising by cemetaries

mustangmuscle
01-18-2006, 04:23 PM
I have Magnaflow and am very pleased. However, that being said, if I had to do it over again, would go with Bassani. You can save some $$ by opting for their BX version over the stainless steel. No salted roads due to ice and snow down south, so the SS might be considered overkill....

The Maggies sound great, but the Bassani, to me, has a more "aggressive" tone. Both are very deep.....

Just my $0.02, fwiw

TheJeanyus
01-18-2006, 04:33 PM
yeah the Borla Stingers sound good but be prepared to wake the dead when cruising by cemetaries
:evil: :yup: It's not as loud in the car as you'd think, though, after hearing it from outside. I never realized how loud my car was outside until I watched someone else drive it down the drag strip.

torched04
01-18-2006, 09:30 PM
Thanks for the input. Borla it is. Which of these two are the stingers? I'm guessing the one on the left marked aggressive?

http://www.borla.com/applications/lookup.aspx/2004/Ford/Mustang/GT (http://http://www.borla.com/applications/lookup.aspx/2004/Ford/Mustang/GT)

uvbnhad
01-18-2006, 09:33 PM
I've yet to hear a Mustang I thought sounded better than a setup with MAC Pro-Chamber and Flowpaths. It still has a chambered muffler sound but at a totally different tone than the Flowmasters.

torched04
01-18-2006, 10:46 PM
Flowpaths are made by MAC correct? Also, do any of you guys think that using an O/R prochamber instead of an X pipe with those bullet type Borla "S" stinger mufflers will make the exhaust pop or raspy? I had that problem when I had the prochamber installed with the one chamber flows that I used to have. The one chambers sounded really good with the stock H, but when the prochamber was put on, it sounded like ass. I just don't wanna spend $600 and it sound like a truck with glasspacks.

qkjuicedpony
01-19-2006, 04:19 AM
having seen all types of exhaust.i will say that just yesaterday i had a customer with a supercharged 04 gt come in with a complete bassani exhaust on his car.his main complaint was that it was too loud and too raspy.so i changed the mufflers out for some 18" magnaflows and the car sounded great.at idle it is fairly quiet and at cruising speeds it is very quiet but when you mash the gas it gets loud.also the fit of the bassani cat back is horrible in my opinion...on more than one occasion i have had to cut up and repair a bassani cat back because it either hung too low or was hitting the underside of the car somewhere


just my opinion :D

Italian LX
01-19-2006, 05:11 AM
I've yet to hear a Mustang I thought sounded better than a setup with MAC Pro-Chamber and Flowpaths.
Borla XS (http://www.deepstageperformance.com/videos/Brian-11.735.wmv) :shrug:
Right Click & Save As


:D

hevymtl
01-19-2006, 05:35 AM
I've yet to hear a Mustang I thought sounded better than a setup with MAC Pro-Chamber and Flowpaths. It still has a chambered muffler sound but at a totally different tone than the Flowmasters.

:werd:

TheJeanyus
01-19-2006, 05:46 AM
My car pops and crackles on decelleration, but it's not raspy at all. I have a ProChamber and Stingers.

The Stinger catback is the catback that uses Borla's XR-1 race mufflers.

torched04
01-19-2006, 10:23 AM
I was searching around the Borla site and I saw the XR-1s, but they were just weld ins and not a full catback. Am I looking in the wrong place? Thanks to everyone for the help and input.

Scothew
01-19-2006, 11:04 AM
I wouldnt trade my magnaflows for anything.

DSkeet
01-19-2006, 11:12 AM
In the future I want Borla.

TheJeanyus
01-19-2006, 11:36 AM
I was searching around the Borla site and I saw the XR-1s, but they were just weld ins and not a full catback. Am I looking in the wrong place? Thanks to everyone for the help and input.
http://www.ninosport.com/index.asp?PageAction=VIEWPROD&ProdID=133

:nice:

mustang1549
01-19-2006, 01:20 PM
i have a vrs xpipe and magnaflows and love the way it sounds. has the nice deep sound that i was looking for. at idle not much louder than stock but when driving very loud.

The Rock 326
01-19-2006, 01:27 PM
Mannaflow X-Pipe, and cat-back.

I had the ProChamber, and Flowpaths, and I like it, but the new set up sounds more refined.