PDA

View Full Version : max tire hieght on fox


Got Boost?
04-06-2006, 07:16 PM
whats the max tire hieght a stock fox can support, and also whats the most width it can support? we are talking about a tire on a 15 inch rim here too

QWKSNKE
04-06-2006, 09:26 PM
Are we talking street tire or a race tire

Got Boost?
04-07-2006, 12:24 PM
drag radials, possibly ET streets...

Got Boost?
04-13-2006, 07:23 AM
any responses? i believe i can run 295 wide max now what about hieght, will 28's fit, what do you recomend?

ncontt
04-13-2006, 09:58 AM
what gear are you using? This will have an effect on what rpm you run at the big end too....but I think you should be able to fit a 295, not too sure on a 28" though, backspacing of your rims may have an effect as well...

Got Boost?
04-13-2006, 11:03 AM
i plan on 4:10 or 4:30 and ill reply with the backspacing on the tires

Got Boost?
04-13-2006, 11:04 AM
5.5 backpacing

ncontt
04-14-2006, 08:29 PM
I "think" depending on what width rim you use that the 5.5 would be ok, I know on my 18's the back spacing is 24 mm...which is around 6 inches I "think", with 10.5 wide I would think you'd want to go with a 6.5 BS...

of course I am NO tire/wheel expert...
YMMV
lol

Brad

QWKSNKE
04-15-2006, 08:47 AM
Do you have drum brakes or disc brakes on the rear. What size wheel? 15x8, 15x10....... Do you have lowering springs?

Got Boost?
04-15-2006, 10:19 AM
Do you have drum brakes or disc brakes on the rear. What size wheel? 15x8, 15x10....... Do you have lowering springs?

have drums still in the rear, i plan on running 15x4 up front and 15x9 out back. the car is still at stock height

1Quik85GT
04-16-2006, 12:28 AM
I have 28x12.5in ET Streets, they are actually 10.5ins wide. I have a 4in backspace on my car but I will be goin to 6in whenever I can find some. I didnt even have to roll my fenders either.

Got Boost?
04-16-2006, 08:57 AM
i think im going to go ahead and stick to a 26, shouldnt hurt rpms with a steep gear too bad. i would go 27.5 or 27 but those tires have less or more width than i want

Brutal87
04-23-2006, 10:03 PM
I test fit these on my car..

295-40-18's & they fit.. I have a LMM lowering kit.

http://i8.photobucket.com/albums/a27/HazePerformance/My%201987%20Mustang%20GT/100_1697.jpg

As for ET Streets.. My buddy is running 28's on his Notch..

http://i8.photobucket.com/albums/a27/HazePerformance/Friends/smustang_030.jpg

..but it hits the lip.. I'm runnin 26's & it's all good, but it all depends on your suspension setup..

Got Boost?
04-25-2006, 06:09 PM
thats white fox looks SWEET with those bullits, i have no idea how you managed to clear 18 inch deep dish bullits, didnt think anything over 10 wide would fit

Frikin NICE ride

ncontt
04-26-2006, 11:05 PM
that white hatch is TIGHT....:drool:

Shorty
04-27-2006, 05:41 PM
my 265's scrub bad in hard corners.

Brutal87
04-28-2006, 06:50 PM
Thanks.. :chug: