Installing an SLP Line Lock???

[Brutal87]

I bought an SLP line lock for my '04 Cobra. I never put it on so I would like to use it on my Fox. The instructions I have are for the Cobra & the set up is a little different.

Sooo... Do I mount it rear master cylinder line & the top rear of the brass block?

http://i8.photobucket.com/albums/a27/HazePerformance/Fox%20Body/Motor/100_2560.jpg

Heres the line lock.
http://i8.photobucket.com/albums/a27/HazePerformance/Fox%20Body/Motor/slp25000.jpg

I know I'll have to make custom lines for it to fit a fox body.

Thanks
Carl

[Italian LX]

Sooo... Do I mount it rear master cylinder line & the top rear of the brass block?
Yep. On the stock Fox brake set-up, you would have to use a T-fitting for the line that comes off the bottom of the master cylinder. However, since you have the brake upgrade (similar to the '93 Cobra set-up) you only have to tap into the single line between the MC and the proportioning valve (brass block).


Here are some pictures of my set-up and how I ran my lines; maybe it will explain it better and give you an idea on how to run them.








http://www.deepstageperformance.com/pics/linelock-01.jpg




http://www.deepstageperformance.com/pics/linelock-02.jpg




http://www.deepstageperformance.com/pics/linelock-03.jpg

[Brutal87]

Great pics.. Thanks for the info..

Time to start bending lines. :banana:

[Got Boost?]

how much did the kit cost, and where did you get it from ill be putting one on my car soon