View Full Version : Valve Spring Q's
junior73
06-20-2006, 04:36 PM
A friend of mine had a set of 351W heads built while he was in California. the problem is, he lost the info on the springs.
They are double springs, with the inner spring having a blue stripe, and the outer with orange on one side and yellow on the other.
the size is 1-13/16 diameter, and 2-7/8" high.
Any help is greatly appriciated.
Keith
vristang
06-24-2006, 03:00 PM
All I can recommend is taking them to a machine shop and letting them check for bind.
This is really the only way to know how much cam you can run with that spring. Anything else is likely a guess.
Maybe a manufacturer painted the springs, or maybe the last shop to work on the springs painted them?
jason
QWKSNKE
06-24-2006, 05:10 PM
All I can recommend is taking them to a machine shop and letting them check for bind.
This is really the only way to know how much cam you can run with that spring. Anything else is likely a guess.
Maybe a manufacturer painted the springs, or maybe the last shop to work on the springs painted them?
jason
:agree:
Take it to someone who can actually check the spring pressures
junior73
06-24-2006, 07:20 PM
Thanks ya'll. Think I am going to have him cart them off to a good shop to give them a look. I can honeslty say that what they are are anybodies guess!
thanks again!
vBulletin® v3.8.2, Copyright ©2000-2024, Jelsoft Enterprises Ltd.