Brutal87
06-26-2006, 02:59 PM
I'm picking up a D.S.S. Pro Bullet 306 that has this cam in it already. I'm going to run it with my Vortech S-Trim , Snow Meth & a small NOS shot. (50 or 75). This looks to be a nice cam for a charger but I have not had any experience with Comp Cams.. Whata guys think??..
Comp Cam
Part# 35-306-8 Grind# 284H-R14 Ser# QA3776
Valve Adj.
GRS valve lift int .533 exh .544
Duration @
.006 tappet lift int 284 exh 290
valve timing open close
at .050 int 2btdc 42abdc
exh 53bbdc 3-atdc
These specs are for cam installed@ 110 intake center line
Duration @ .050 intake 224 exhaust 230
Lobe lift .3330 .3400
Lobe seperation 114
Thanks,
Carl
Comp Cam
Part# 35-306-8 Grind# 284H-R14 Ser# QA3776
Valve Adj.
GRS valve lift int .533 exh .544
Duration @
.006 tappet lift int 284 exh 290
valve timing open close
at .050 int 2btdc 42abdc
exh 53bbdc 3-atdc
These specs are for cam installed@ 110 intake center line
Duration @ .050 intake 224 exhaust 230
Lobe lift .3330 .3400
Lobe seperation 114
Thanks,
Carl