PDA

View Full Version : Thunderbird Supercoupe Question...


coupe
07-11-2006, 02:11 PM
Can anyone find for me if the Pilot bearing for a Thunderbird Supercoupe is the same as that of a 5.0L style bearing? I have an issue of it being either a 5.0L style or an SVO style...Cannot find for sure. Guy at the ford-dealer local not showing me a part number for the Tbird...(I think he was just being lazy). I will call Scott at McCarty tonite if I can't find out sooner.

Thanks :nice:

ncontt
07-11-2006, 04:25 PM
I seem to recall them being the same as well...BUT I wouldn't bet the farm based on that...lol...good luck and post up when you find out for sure.

montanagrog
07-13-2006, 04:34 PM
It should be smaller diameter at 0.59 The trans has the longer, smaller input.
My cross number is 6202-2RSJ/202FF CR

QWKSNKE
07-13-2006, 04:53 PM
:eek: The site lurker speaketh!!



:jester:

montanagrog
07-13-2006, 05:00 PM
One a year, aint bad!!:chug:

Just the facts, mam....

Dale McPeters
07-13-2006, 05:53 PM
:eek: The site lurker speaketh!!

:jester:

The site lurker would be correct.....:jester:
My '86 model turbocoupe has a different one
as compared to the '91lx.

QWKSNKE
07-13-2006, 08:01 PM
One a year, aint bad!!:chug:

Just the facts, mam....


:lol:

joker
07-14-2006, 07:28 AM
The site lurker would be correct.....:jester:
My '86 model supercoupe has a different one
as compared to the '91lx.
86 would have been a turbocoupe, not a supercoupe

Dale McPeters
07-14-2006, 12:32 PM
86 would have been a turbocoupe, not a supercoupe

Correct.....edited my post. Maybe I just need to read and quit
posting as I am brain dead anyway.....:jester: