PDA

View Full Version : Diff. between GT and Cobra EEC (renamed for clarity)


natedawgg94
07-17-2006, 05:18 PM
just wondering what the differences are between the mustang gt and cobra computers. information i'm looking for is can i put 24lbs. injectors in a mustang gt and just sway computers to get me by for a month or so?:popcorn:

QWKSNKE
07-17-2006, 06:07 PM
swapping the computers will not help.

You will need a 24#MAF to run 24# injectors

natedawgg94
07-17-2006, 07:27 PM
in the sn95 the maf's are the same incobra and gt cpu does the recal.

natedawgg94
07-17-2006, 07:28 PM
i know this cause the pro m 80mm maf in my car is cal'd for 24's it came out of a cobra with 24's

QWKSNKE
07-17-2006, 08:07 PM
in the sn95 the maf's are the same incobra and gt cpu does the recal.


ok I understand what you are asking now. Yes you can probably do that

natedawgg94
07-18-2006, 06:46 AM
other things i was wondering was fuel pressoure differences, timing, cam specs., etc. my internet searching has come up with mostly modded cars need some factory specs. if anyone has a site to go to that would be awesome thanks......

QWKSNKE
07-18-2006, 07:50 PM
other things i was wondering was fuel pressoure differences, timing, cam specs., etc. my internet searching has come up with mostly modded cars need some factory specs. if anyone has a site to go to that would be awesome thanks......


this question would be better asked in the EEC room

93Cobra#2771
07-19-2006, 07:13 AM
FP = the same
timing = slightly different
cam specs = slightly different

To answer your original question, yes you can do that.

natedawgg94
07-19-2006, 12:29 PM
the cam has a lobe separation of 122 on the cobra and it was borrowed from a T-bird according to the info i've got.which with the 1.7 on it makes it a hotter cam and good for turbos....

93Cobra#2771
07-19-2006, 12:38 PM
Cam specs:
http://www.corral.net/photopost/showphoto.php?photo=2047&cat=500&ppuser=37979

If you are going through the trouble of sticking cam in, no way would I use a stock Cobra cam. Custom or a power adder cam at the bare minimum...

natedawgg94
07-19-2006, 02:50 PM
i'm using the b cam when i swap eveything right now i'm waiting on funds for some heads. also doing some research on different stuff..

Blown 5.0
07-19-2006, 03:54 PM
i'm using the b cam when i swap eveything right now i'm waiting on funds for some heads. also doing some research on different stuff..
I would get a better cam than the B,

natedawgg94
07-20-2006, 11:59 AM
i will be getting a custom turbo cam later but for now the b cam is what i'm using til the turbo time comes which is gonna be a much later date.