PDA

View Full Version : Ok got the car to run like somewhat stock


slvrbullit
09-12-2006, 11:35 AM
Aside from the heavy came lope, I got the car to run and idle via a file I downloaded of the eectuning forums. This board member had a similar combo with on a couple major differences, cam, injectors, and maf calibration ( same size maf just different cal). Now for my question, after the car has warmed up is it suppose to go in to OL or CL? Only reason I ask is I notice the fuel consumption is not as bad but still not that good. I need to set the breakpoints and slopes for the injectors and of course the timing with the cam as well.

I am thinking for heading to the dyno this weekend if either Lee or Brian are available to meet there let me know.

QWKSNKE
09-12-2006, 12:51 PM
I'll know closer to the end of the week if I can come down.

Car should go to close loop after the 02's warm up.

slvrbullit
09-12-2006, 01:58 PM
ok, cool. It is going to closed loop after the O2's warm up then. I was just checking as to I dont remember the CL light in Calcon ever coming on before now.