PDA

View Full Version : new chassis dyno in Dothan Al.

onebad12
12-05-2006, 12:39 PM
It is a new Mustang chassis dyno with wideband O2. It is capable of 2000HP and 250mph. Can dyno cars and motorcycles. Speed Inc. is the shops name.
QWKSNKE
12-05-2006, 05:49 PM
Cool. Have you used them yet?
onebad12
12-06-2006, 11:10 AM
Cool. Have you used them yet?

Not yet, trying to get my car tuned as best I can on the street then will take it over and try the dyno out. Kinda high I think, they told me 150 for 1 hour as many pulls I wanted with wideband and me tuning it. Edgar said he paid like 130 for acouple hours in Birmingham.
QWKSNKE
12-06-2006, 04:30 PM
Not yet, trying to get my car tuned as best I can on the street then will take it over and try the dyno out. Kinda high I think, they told me 150 for 1 hour as many pulls I wanted with wideband and me tuning it. Edgar said he paid like 130 for acouple hours in Birmingham.


yeah that is high. I think I average around 85/hr at the same place Edgar uses
SvoBrown
12-06-2006, 04:54 PM
Z1motorsports, close to me charged $50 for 10 pulls and lots of tech help.
They need to be able to work with you on the price.
Wickd GT
12-10-2006, 06:49 AM
I don't know who are these people, but I'm going to check them out. I think they are trying to get rich with those prices. I guess the ricers will pay that.


Edgar
onebad12
12-12-2006, 10:17 AM
They had Dyno Day Sunday, good turn out. James Johnson from Panama City brought his Real Street Mustang and laid down 1067 rear wheel HP! It is a 331 with TFS R heads and a single turbo. You can check out some pics at http://forums.dragcoverage.com/cgi-bin/YaBB.pl?board=track;action=display;num=1165807651
ncontt
12-12-2006, 08:21 PM
dayam, what size turbo on that monster? 91 or 101mm?
onebad12
12-13-2006, 08:33 AM
I beleive it was a 91, but not sure. You should come down Jan. 14th, that is the next Dyno Day. He is coming back and some other Real Street guys from Florida that say they will have more HP.
onebad12
12-18-2006, 08:37 AM
Ok I got a new price from Mike at Top Speed. $100.00 for a hour of turning the rollers. So if you are tuning and not turning the wheels the time doesnt count. That doesnt sound as bad. I will be there first part of Jan.
QWKSNKE
08-04-2007, 11:23 AM
wickd gt: "get rich"? wtf? do you have any idea how much a dyno costs? a good one is in the $40,000+ range, and that 2000 HP model with bike attachment most likely cost over $100,000. so i would say $150/hr is not too unreasonable


It is very unreasonable when you consider that average dyno time per hr is less than $100. Wickd GT like a lot of the members on this forum use a dyno in Trussville that charges $85/hr