PDA

View Full Version : Lower Control Arms


04 Mach1
03-16-2007, 10:18 PM
Looking into getting a new set of LCA. What kinda are ya'll running? Are there any bad ones I need to stay away from?? Just trying to get some good opinion before the purchased. Thanks in advance.

QWKSNKE
03-17-2007, 07:24 AM
What are you running now? For which car?

04 Mach1
03-17-2007, 08:14 AM
They'll be for the GT. I fab up a set years ago from some roll bar tubing,but the bushing I used didn't hold up. Thought about getting a set that you can adjust ride height. Any one have any luck with them?

QWKSNKE
03-17-2007, 08:58 AM
I think the weight jackers are suppose to be good

ncontt
03-17-2007, 03:42 PM
I ran the "cheapies" from JD's performance. No problems, think they were copies of someone elses design. I got a deal on them b/c the color of the powder coat turned out too "orange"...

qkjuicedpony
03-17-2007, 04:44 PM
i run the steeda weight jackers with great results

SvoBrown
03-17-2007, 04:55 PM
http://www.evolutionmsport.com/evmCa...roducts_ id=4

I just put mine on. Very strong. 3 – piece urethane bushing on the chassis end and spherical bearing on the axle end.
My svo is within a half inch all the way around now. With the stock arms one side was 1.5" lower than the other.

I used a set of the cheap arms for a while and the bushings are broken from only 4K miles. Buy the nice ones and never look back. Steeda was my first choice but I got these in a trade.

Evol393
03-18-2007, 09:59 AM
The upr ones are pretty nice and work too.