progress pics.

[bill302]

as some of you might have read i blew a headgasket at the track 2 weeks ago i removed the heads and ported them along with the upper and lower intake i did this myself then i had the machine shop clean and check them cut the valves 3 angle and mill 10 thousands and install seals....all i need is the injectors Mr.Slave gave me to arrive in the mail and thanks again Mr.Slave i owe you one!!!!!!!! and i will be done well here is where i'm at.....

heres what it looked like a few days ago....
http://i43.photobucket.com/albums/e382/bill302/mustanglongblock001.jpg



and here is where im at now...
http://i43.photobucket.com/albums/e382/bill302/mustangmotor001.jpg
http://i43.photobucket.com/albums/e382/bill302/mustangmotor004.jpg
http://i43.photobucket.com/albums/e382/bill302/mustangmotor003.jpg

heres a pic.of the port work....
http://i43.photobucket.com/albums/e382/bill302/mustangmotor002.jpg

[Mr.Slave]

Anytime! Hey did I give you that tracking number? I ship stuff all the time for my ebay business so things get a little fuzzy and I cant remember if I did or not. If not I'll give it to you Monday.

Oh and by the way, I didn't get a chance to clean them up at all so you might want to check the filters and run a little cleaner through them.

[04 Mach1]

:nice:

[bill302]

Anytime! Hey did I give you that tracking number? I ship stuff all the time for my ebay business so things get a little fuzzy and I cant remember if I did or not. If not I'll give it to you Monday.

Oh and by the way, I didn't get a chance to clean them up at all so you might want to check the filters and run a little cleaner through them.

no i didnt get a tracking number...........but i do have a new filter,pintle cap, o-rings and spacer...thanks.

[bill302]

i got the injector today they tested great...i replaced the one i had leaking and finished motor and its running alot stronger after the port work,new headgasket and replacing the leaky injector....and thanks again Mr.Slave