StreetStangs.net

StreetStangs.net (http://www.streetstangs.net/forumindex.php)
-   Mod Motor Tech (4.6 & 5.4) (http://www.streetstangs.net/forumdisplay.php?f=18)
-   -   oil pressure (http://www.streetstangs.net/showthread.php?t=11404)

01silver freak 03-08-2008 04:51 PM

oil pressure
 
ok i have what i think is low oil pressure for my 01 5spd gt since my gauges done have numbers just an H and a L and mine sits on the low side i bought and frpp oil pump and pick up tube and i want to install it but all the bs that goes along with it makes me not wanna do it when i rev it up the oil pressure dont move done changed my sending unit and when i replaced it it did move a little so im thinkin my pump may be bad,pick up tube is clogged, or where the oil filter screws on may be clogged also

SvoBrown 03-08-2008 05:24 PM

Had a friend that the oil pump went out on his 03 gt 4.6. Motor dies really quick. He had been running it for a while when he saw the gauge. Wonder what the noise was. 37k on the engine.

01silver freak 03-09-2008 10:32 PM

mine is a dd and it has 88.5k it dont make a noise the oil pressure i guess has been like that since i got it i noticed it when i started putting performance parts on

CrazyInBlack 03-16-2008 10:52 AM

yeah low oil pressure on an OHC car is a bad situation. but the ford stock gauges are also not worth crap. your car could blow up before that gauge moves.

Wall96cobra 03-16-2008 12:39 PM

I would check your oil pressure with a external gauge before replacing anything.

01silver freak 03-16-2008 06:45 PM

i forgot how to check the pressure with an external gauge...i need the steps

SvoBrown 03-16-2008 08:06 PM

Go to the ford dealer. $50 and then he tells you , yep. low oil pressure and a bad main. $3700

banditmwp 03-16-2008 08:21 PM

Quote:

Originally Posted by SvoBrown (Post 145292)
Go to the ford dealer. $50 and then he tells you , yep. low oil pressure and a bad main. $3700

:lol:

that's one way to do it.


the other way would be to buy you a cheap MECHANICAL oil pressure gauge KIT from the parts store and put it in place of your stock sending unit. Then crank the car and watch it...

unless there's a better suggestion?

01silver freak 03-16-2008 11:09 PM

what is the oil pressure for the sn-95 i looked in the haynes manual and its not in there

Wall96cobra 03-17-2008 08:08 AM

Quote:

Originally Posted by banditmwp (Post 145293)


the other way would be to buy you a cheap MECHANICAL oil pressure gauge KIT from the parts store and put it in place of your stock sending unit. Then crank the car and watch it...

unless there's a better suggestion?



that's what I would do


All times are GMT -6. The time now is 06:57 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.