Datalogging?
here is a list of what i can watch. say out of 5 of them whats the best to watch and why?
battery_voltage coolant_temp desired_idle_rpm fp_duty_cycle idle_spd_valve_d inj_press_drop intake_air_temp load lt_fuel_trim_b1 " " _b2 maf_counts maf_voltage rpm short_term_trim_ " " " spark thrt_pos_absolut AIN_1 " " 2 |
I would think it would depend on what you're trying to accomplish.....ie: if you're tuning idle, part throttle, under load, etc. etc.
|
I log 5 on mine.
boost rpm's MAF volt egt tps if you can do the injector pulse that will help a lot! |
Quote:
MAF volt tps are u comparing them togather? |
The tps showed how bad I was at lifting the petal. I wanted to add timing as I went more on the throttle so I would have more control of the power going down. Turbo's are hard to control sometimes.
THinking out loud again. But it was a good information on how everything worked. I am still learning. |
Quote:
Unless you have done a major change to the car, you don't need to much tuning that is data logging related. When dealing with a new blower setup or a MAF change, then you would want to datalog MAF voltage, TPS, Load, RPM, and timing |
these 2 say invalid while data logging
maf_counts maf_voltage |
All times are GMT -6. The time now is 03:06 AM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.