cheap replacement clutch ?
 

I don`t want to spend too much on a clutch thats only going to be used a couple of months,,,,the one in the car is so bad I can`t move the car now and I`m putting the adapter for the 5.0 trans for the bigger clutch but am not quite ready for that yet any help/suggestions would be appreciated

thanks Brian

So, are you saying that you need a temporary 10.5" clutch now?

parts store...$100 or so

no I need a temporary small clutch for the 2.3 n/a motor as I`m putting the big turbo 2.3 w/5 litre clutch and trans behind itthe plat is 8 1/2 in. and 1 1/16 -10 spline but am needing alutch to get me around untill the swap

I could'nt find JUST the clutch alone on O'reilly's site,but looky here...
http://www.partsamerica.com/ProductD...pe=242&PTSet=A

I have a few of them laying around. How far are you from my place 36263 is the zip.

just some FYI. Just because you install a 5.0 t-5 does not mean you will install a 5.0 clutch. You will need a different flywheel to do that.

The 2.3 uses a lot smaller flywheel than a 5.0 and I don't know if anybody makes a larger flywheel so that you can use a 10.5" clutch

As of about 2 months ago, SPEC has been making one. It's a neutral-balance 5.0L flywheel with the 2.3 turbo crank pattern. Requires the bellhousing adapter from Stinger Performance. We made that flywheel mostly for them, as they sell the whole package.

:nice:

thats what I`m using getting it all from stinger I love the idea I`ve got a guy north of the border here that`ll build me a kevlar clutch built to any specs I want ...reasonably priced also