what push rods?
 

using 2031 with stock rockers and the push rods are to short. has anyone had this problem if so what you did you use.
stock heads
stock rockers
w/crane #2031

I have always used Motorsport cams and they use stock push rods. I have used luniti as well and just used stock push rods. Have you thought about calling Crane and asking them?

something is off. stocklength pushrods should work for you.
Using factory roller lifters, correct?

Are you SURE those are the stock pushrods? They should measure 6.25".

I have ordered a pushrod adjusting tool from summit. never had this problem before either.