Crzypny's 94 GT
 

http://i225.photobucket.com/albums/d...Crzypny001.jpg

Starting from humble beginnings ...

213 rwhp | 278 rwtq

B303 Cam
MSD Coil
BBK CAI
FRPP Shorties
O/R H-Pipe
Flowmaster 1 Chamber weld-ins

http://i225.photobucket.com/albums/d...ny/94GT002.jpg

Top End Build
 

TW Heads
TFS 1.6 RRs
TFS Street Intake

At the time we decided to stick with the B303 Cam.

http://i225.photobucket.com/albums/d...Picture075.jpg

Off with the old ...

http://i225.photobucket.com/albums/d...Picture082.jpg

and on with the new ...

http://i225.photobucket.com/albums/d...Picture086.jpg

http://i225.photobucket.com/albums/d...Picture104.jpg

Initial Track Results
 

13.61 @ 103.92 - on 255 street radials (Dec 06)

http://i225.photobucket.com/albums/d...941_Medium.jpg

TW Heads
B303 Cam
TFS Street Intake
TFS 1.6 RR's
BBK CAI
MSD 6A
MSD Coil
FRPP Shorties
Prochamber
Mac Cat Back
Pro 5.0 Shifter
FRPP B springs

Fuel & Air Upgrades
 

BBK 75mm TB
90mm MAF w/powerbell
AFM Load io
AFM Powerpipe

http://i225.photobucket.com/albums/d...Picture005.jpg


Below is a prime example of why it's nice to have access to a lift ... :jester:

http://i225.photobucket.com/albums/d...Picture001.jpg

2nd Trip to the Dyno
 

After a few more upgrades it was time to take it back to the dyno for a tuning session. (Apr 07)


Induction:
TW Heads | TFS Intake | BBK 75mm TB | 90mm MAF

Valvetrain:
B303 Cam | TFS 1.6 RRs | TFS Pushrods

Ignition & EEC:
MSD 6A | MSD Coil | FRPP Plugwires | AFM Load io | SCT Chip

Fuel:
24 lb Injectors | 255 lph Fuel Pump | Kirban AFPR

Exhaust:
FRPP Shorties | Prochamber | Mac Catback

Rear:
FRPP 3.73s

269 rwhp | 305 rwtq

http://i225.photobucket.com/albums/d...ypnydyno01.jpg

May 07 Track Results
 

http://i225.photobucket.com/albums/d...ypny/00003.jpg

Despite slapping on a set of Nitto DR's we only saw minimal improvement. 60' went from a 2.2 with street radials to 2.0 with the Nittos.

R/T - .398
60' - 2.072
330' - 5.744
1/8 - 8.725 @ 83.32 mph
1/4 - 13.424 @ 105.49 mph

Here's a Vid from one of the runs...

http://i225.photobucket.com/albums/d...pny12May07.jpg

Suspension Buildup
 

Over time the 94 has developed a nasty case of the squeaks up front and we discovered that one of the rear shocks was blown when the gears were installed ... so you could say that this is a bit over due. (Sep 07)

Tokico Struts & Shocks
FRPP Front Control Arms
HPM HD Upper & Lower Control Arms
Prothane Spring Isolators
MM CC Plates
MM Full Length Subframes

http://i225.photobucket.com/albums/d...crzystruts.jpg

Still waiting for the rear control arms to get here :popcorn:

dang, Merry Christmas to YOU....have fun.

Upper and Lowers finally showed up

http://i225.photobucket.com/albums/d...ystruts005.jpg

Click pic for details on rear suspension install!

http://i225.photobucket.com/albums/d...rearend023.jpg