My latest mod....
 

Finally got around to dropping my 3 row radiator in,along with my Taurus SHO e-fan,and adjustable fan control.VERY noticeable power increase over the flex fan(and it does'nt sound like a C-130 at takeoff).

3 row radiator from the pull a part (practically new) $30
Taurus fan from the same place $25
Controller $18 at Advance
Zip tie type fan mounts $3 at O'reilly's

Grand total of $76 :D:metal:

if you can can you explain what it takes to do this setup i am very interested in doing this same setup and dont know where to start or what to do with the old fan and clutch/ wiring ect.

If need be,I can come by and show you,or you can come check mine out,it's a little easier to do it "hands on".

i will get in contact withb you when i get som time off and well meet some where is there a list of parts i can get ?

what kind of vehicle did you source your 3-row from?

I actually found it in a '93 4 banger hatch of all things!

I'll put the part #'s up of the controller,and fan mounts when I get home from work.As far as the fan goes,just find one from a Taurus.

I noticed a lot of 4-bangers out there (Bham Location) when I went but I didnt know they came with 3-row radiators.

This was the first that I've seen,but from what I've read since then,there was a HD cooling option available for them! The only reason that I can think of,is because they switched to the 8 plug head in '91 or '92 on the 2.3's.:shrug:

might be making a trip tomorrow, lol. The old T-bird could use a little cooling boost.