Recommendations on vacuum caps & hoses
Can anyone make a recommendation? It seems like every other month I have to replace the vacuum caps on my Turbo Coupe. I been using OE style rubber and they just seem to crack and fall apart too often. Thanks!
|
Just use vacuum hose and bolts or sticks!:jester::jester:
|
have you tried the assorted caps you can get your local parts store?
|
Quote:
|
I would recommend golf tees
actually I was going to say try using a worm clamp on them if you can get one on them. |
You need a check valve on the line that feeds the vac tree?or pvc is stuck open or vac lines could be routed incorrect.jmo
|
2 Attachment(s)
Check lines routing just in case.Here is routing for #1 stock boost controller and #2 if you have the gillis type.:dunno:
|
1 Attachment(s)
This is how I would try it.Tee the boost gauge and controller to the intake vac source as to keep them working proper.Then install pcv in the main line so it will not allow boost to back track through the vac tree..jmo thinking outside the box.:shrug: Also the gas vapor from vapor canister from the tank can and will deteriorate hoses.
|
Quote:
|
Quote:
Quote:
|
All times are GMT -6. The time now is 05:32 PM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.