StreetStangs.net

StreetStangs.net (http://www.streetstangs.net/forumindex.php)
-   Ford Pushrod Tech (5.0 & 5.8) (http://www.streetstangs.net/forumdisplay.php?f=17)
-   -   3G Alternator Upgrade (http://www.streetstangs.net/showthread.php?t=13063)

Sendero 10-29-2008 12:48 PM

3G Alternator Upgrade
 
Where did you guys get your alternators and who makes good kits? Instructions?

ncontt 10-29-2008 03:27 PM

I got mine from click me granted it was a bit extra to have it powdercoated black.

There's really not much to it. You have to "notch" the alt. bracket (stock) to make it fit but it takes about 5 mins with a dremel tool or air grinder. you also need to upgrade the wiring to the starter solenoid, again not hard. I have my powdercoated black stock alt. bracket if you are interested (for a fox body).

here is a how to----> how-to

EHardy1971 10-29-2008 04:02 PM

I got mine from the junkyard out of a '98 V-6 'stang.The 3.8 T-birds/Cougars have them along with the SN95's, and the Taurus,the only thing about the Taurus ones is you have to re-clock the housing halves to get the connections in the right place.

Quote:

Originally Posted by ncontt (Post 165211)
There's really not much to it. You have to "notch" the alt. bracket (stock) to make it fit but it takes about 5 mins with a dremel tool or air grinder. you also need to upgrade the wiring to the starter solenoid, again not hard.

:yup: And he'll need a different upper mounting bolt,or nut and bolt (like I did on mine),and IIRC,a different length lower bolt as well.

ncontt 10-29-2008 05:24 PM

Eric, you are correct sir....forgot about that minor issue....I did this to one of my foxbodies way back in early 2000 as I recall so they weren't as easily accessible as they are now. At any rate you can usually find them pretty cheap.

Italian LX 10-30-2008 12:07 PM

http://www.fordfuelinjection.com/?p=75

:nice:

Sendero 10-30-2008 12:53 PM

Where did you guys send the charge cable; directly to the battery or to the positive side of the starter?

EHardy1971 10-30-2008 01:43 PM

Quote:

Originally Posted by Sendero (Post 165283)
Where did you guys send the charge cable; directly to the battery or to the positive side of the starter?

On the positive or "hot" side of the solenoid where the battery cable connects at.

ncontt 10-30-2008 01:44 PM

mine goes to the pos. side of the solenoid with a 150amp inline fuse (fuses and holders can be found at stereo shops, marine suppliers, etc) I spliced into the other little white wire (?) for the small plug on the back of the alt. AND I left the stock fox body plug (big one) on there incase anything ever happens and I need to slap my stocker back on there to make it from here to there or whatever.

HTH

Italian LX 10-31-2008 07:56 AM

Quote:

Originally Posted by Sendero (Post 165283)
Where did you guys send the charge cable; directly to the battery or to the positive side of the starter?

I have an Optima battery, so I just added a side post and ran it to there.

As with ncontt, I too used an inline fuse (it came with the kit I got from Ryan).

qkjuicedpony 11-01-2008 08:06 AM

My 3g Upgrade was really kind of simple.



It came on the car from the factory:D


All times are GMT -6. The time now is 05:08 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.