what size tb to run
I've got 93 cobra intakes and i was wondering what was the biggest size throttle body to run with out hogging the intake out. Help please.
|
70mm or 75mm! What about your MAF?
|
i've got a 76 mm maf
|
70mm ftw
|
You have to modify the 93 cobra intake to accept any t/b bigger than a 65mm.
It doesn't take much though. |
Wanna borrow my 105mm Accufab Race TB? :burnout:
Seriously, Lee is right. Doesn't take much with a die grinder. And if you don't have a die grinder, this is a perfect reason to go buy one!! Here is a pic from when I opened up a Vic 5.0 to accept a 90mm... http://www.the-arnolds.net/Cobra/vic...Port-Match.jpg You can see (hopefully) that I just put ~1" transition there. |
Quote:
Yep. ChipR4cam on here had to remove maybe an 1/8" for my 75mm t/b to fully open and not hit any part of the intake |
thanks for the help
|
I have a cobra intake and a 70mm TB. I did not have to modify anyting. The opening in the 93 Cobra is 70mm. Maybe I was lucky but the gasket and TB lined up without have to modify anything.
|
Quote:
|
All times are GMT -6. The time now is 03:27 PM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.