Project 93 red neck
 

Got me a 93 lx with 373 gears and subframe connectors. got me a sbf with a c4 with 3500 converter. hope to have it running in a few weeks. waypastcrazy is posting pixs for me.

pics
 

here ya go joe.

one more pic

Had fun today going and getting it lol o and most of those parts look familiar! lmao

Thank u again for going and getting it. its people like u that make this fun. AMEN

Amen brother!!! Lmao

Good deal. Looks like you will be going to the track soon

Nice ride:metal:

way to go. maybe it will go together with no hick-ups!!!!!!!!

i want those wheels
robbie

Those are the ugliest five star ever made to me! but alot of people want them.

lol! they r prostar right?

robbie

:nice: Good luck man! It'll make you sell all that 4.6L stuff. :D

They are pacer wheels 4 lug. the mod stuff will only get bigger! this is just a toy.

:slap:

Here are some specs on motor. 357 flat tops. around 9.6 compression with these 60 cc heads. a set of worked over edelbrock heads with 1.7 roller rockers. 274 comp cam and a stealth intake topped with a 650 or 750 trying both. should make 250 on hp i hope

What kind of heads are those?

Edelbrock

Alumeenum!lmao!

Opps i will have around 11.5 with flat tops! need some dish pistons.

Looks like a fun project. :nice:


Are you going to change your name to "joehatch" now? :jester:

No i still have my coupe!

:think: when did you get a coupe?

My 02 is a coupe lmao

Nice project Joecoupe

What hood can i get by with on this

i am just going to cut a hole in the hood and let the breather stick out:pimp:

Thus the title "Project 93 red neck" :jester:

LMAO!:jester:

^^^^if someone would sale me there hood:jester:

why not call it

Project93hatchthatjoecouldntmakefastifheshovedajet engineinthehatch

u going to get some of it so dont worry!!!!!

I dont want "some" cupcake.....bring "all" you got:popcorn:

you heard it here first folks!:duel:

Lmao! Hell it just a bunch jy parts.we still tryn figure out which way pistons go in I doubt it ever make it down track the way we going.

If we run outta beer and someone cuts the shade tree down. We will prob get it figured out. Lol

What hood?:jester:

lmao!

:spit:

if it turns out anything like my 86 coupe did i will be happy!

plans have changed!:banghead: i just cant do the 351w short block "right" within the budget. so i will be suck with a weak knee 331:weep: but i will have a roller cam with 331:metal:

joe don't feel bad ,, thats more then my 306... you just have to put 2 kits on it like me..
"Hamster motor" thats all it is...

that 331 will do just fine if you set it up right. just give the hamster more cheese!

Someone has been reading Hot Rod Magazine! :banana:

lmao! i am gona donates some miracle grow to put in the cheeeeese.lol

:think:

well i have got my carb ready! still waiting on other parts:banghead:

1)What's the specs on that carb?
2)Should we be scared of it? roflmao

Its a 750 dp. and be scared of what?

Specs on Carb= It's Blue overspray
Scared=Not with joe driving it


:jester:

theres nothin wrong with a 331,but hey what do i know:jester:

Same here...331s can run good:metal:

I agree with preston on 331. No need to fear the carb.lol. Now my little oh 2.3. Hybrid turbocoupe might be a different story. Lmao vroom!vroom!

this will be the meanest 331 you all will ever see!!!!:wiggle:

well it has changed again!:metal: this is what its really going to be. 3.850 stroke, 5.956 rod, and a 1.600 ch piston. it will be flat tops at around 11.2 compression. i plan on getting in on some bracket racing this year.

Hmmmm. If I do the math....










:think:

















http://www.specialtyengineering.ca/s...e_dyno_001.jpg

:shrug:

thought you were smarter than that:jester:

Yes it will be slow!

Come up with some more red neck parts today! just bought a box full of parts so maybe i can get a kit together:jester:

http://i308.photobucket.com/albums/k...0305101325.jpg

http://i308.photobucket.com/albums/k...0305101326.jpg

http://i308.photobucket.com/albums/k...0305101327.jpg

http://i308.photobucket.com/albums/k...0305101328.jpg

http://i308.photobucket.com/albums/k...0305101329.jpg

http://i308.photobucket.com/albums/k...0305101330.jpg

some entertainment for u folks:jester:

http://www.youtube.com/watch?v=xvaEJzoaYZk

Quit Playin and get this thing Built!!

its going to happen all at once:banana:

:bs: Dont want to hear it!:jester:

yeah I can't wate,,, judgement days soon.:banana:

:bowdown:

Lmao. I have been throwing miracle grow at him. He will not take it. He says he don't have 15 grand to throw at the chasis. Keep it simple and have fun.

you better have both kits on and tuned in!!!!:wiggle:

and called chp today another 5-8 days plus a bunch of other parts!!! i am also take donations :jester:

itll be nice once done..

some more red neck stuff:metal:

i was going to mount my 5" tach today but do not want to make any holes in this dash. what is some ideals? i was thinking to take the stock gauges out and putting it there but really dont want to do that. i have a fuel cell so the gas gauge will not work. I just dont wont to mess with the value that much. if u know what i mean.

Mount it to the side of the cluster housing. It's easier to replace than the entire dash and you can find them pretty cheap, so putting the car back to stock won't be a problem. Go ahead and buy one now and store it for future restoration.

In order to live up to the name "Project Redneck" you have to drill holes in the dash and install it with wood screws. :jester:

Duct Tape????

Velcro. :D

Don't scrap it...JB it :jester:

Zip-tie it to the steering column!!! :wall96:

i will have it tuned

Monster Tach? Why not use the stock tach and wire in a shift light? It's easier to mount.

i cant see:jester:

. . . or read.





:D

Know how I know you aren't originally from alabama?:jester:

:rofl:

Come on tell us.......:jester:

LOL... I moved here, saw all the monster tachs and thought "man these guys have some fast street cars" ... Didn't take too long to figured out Monster Tachs are the same as fartcans on a Honda...they just MUST be there no matter what. :D

:spit: :rofl:

By the way you did not call last night....

you better

and these came in today :banana:

http://i308.photobucket.com/albums/k...0326101853.jpg

http://i308.photobucket.com/albums/k...0326101855.jpg

http://i308.photobucket.com/albums/k...0326101856.jpg

http://i308.photobucket.com/albums/k...0326101857.jpg

i wanted the blue lights out of this one but can't find the things:jester:

http://i308.photobucket.com/albums/k...0326101915.jpg

i have tore 2 motors down to find 1 i can do a stock bore with. so i put the crank in and checked end play and i have 4 on the gauge:shrug: and put a rod and piston in to see how deep the piston is in the hole at TDC and it is 16 on the gauge. so with the fel-pro Z10112 gasket (.039 in. Compressed Thickness) i am have the block deck .010 to put me in my .045 quench pad range.so it goes to machine shop tues to get decked,cam bearings, and freeze plugs:metal::metal:

I would check all 4 corners to see how much to deck the block. I have seen them have .004~.006 difference from front to rear and side to side.

I did and .010 will do it.

Sounds like you have a plan :metal:

I am ready to make a pass in the red redneck hatch lmao some people around here think they are the only ones that can build an engine.twimc lmao

NWS words in the song!:jester:

http://www.youtube.com/watch?v=joWRs...eature=related

yea yea just get that thing done already!:jester:

headed to machine shop in about a hour! dont look for the car to be fast! maybe 8.0 off motor

I dont build them...I just wait for someone else to pay all that money and then buy them right off their engine stand



:jester:

lmao!

Yea watever! lol you still want this wideband?

Yea i want it. i have found a problem i think my rods are going to hit the cam.

That little stroke should clear easy. Lmao