96 cobra and tweecer rt
i have the tweecer rt from a previous car (95 gt) and want to use it for the cobra. i noticed the sticky about inlet air temps/engine coolant temps. is the tuning similar for these cars? i ran through the base tune just to see and some of the functions/scalars/tables are similar. what would be some good first suggested tuning areas?
thanks jake |
What processor/strategy is your Cobra? My LLX3/CDAN4 went from 273rwhp to 285rwhp by just swapping in the AOL3 fuel and spark maps. Playing with my stock MAF transfer I squeezed out four more RWHP before I stopped tuning on the Cobra.
|
i have the llx3/cdan4. you gained that much going to the aol3 spark/fuel maps! i will have to take a look at that file. i would imagine i need to get flow/volt #'s from c&l to input also for the maf. also did you ever use the sealevel load scaling on your cobra?
thanks jake |
Quote:
Quote:
|
i got the c&l kit for 100 bucks (meter,housing,filter,inlet pipe).so i figured i'd give it a whirl. i haven't installed the tweecer yet, i'll probably do it this weekend. but i will look out for the stalling at decel.
thanks jake |
i installed the tweecer and used a aol3/crajo file i got off yahoo group for comparison. i used the spark files and that was it pretty much. man, this thing hauls now! it is a night and day comparison from the xcal2 tune! also no stalling either so far.
|
maf transfer
i have a flow sheet for the c&l and i tried to input it in and when i came back to the screen it looked like a bunch of squiggly lines? i am using a10 is that the problem? or can you not adjust this function?
also at what point do you need to bump to a larger inj for the mod motors? i have a set of 30#'s sitting around. thanks jake |
Quote:
Quote:
|
every time i try to change the maf values the curve comes out like someones scribbled lines everywhere? do i need to convert the flow sheet from the xx.xxxe-5 numbers to something else? or is ther something in the scalars to allow me to manipulate the curve? i am using 1.30a version.
thanks jake |
C&L is like any other MAF - measures airflow. Not sure what all this C&L talk is about as many hundreds of people run them just fine. Mine car runs like a stock car even though it has a cam, 80mm C&L, 85mm TB (big TB's are a nightmare to tune) & a supercharger with H2O injection. I would never go and blame my lack of tuning skills on the air meter.
|
All times are GMT -6. The time now is 07:16 PM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.