i had one they are nice! remember the one i had in the coupe. just need to come up with something to mount it.

FYI - If your in the B-Ham area, I was at pull-a-part a two weeks ago and there was an automatic SN-95 (I think a 1994) IIRC it still had the console and shifter, you could probably get it real cheap and proto-type off of that instead of butchering yours. I believe it was gray.

Get a quarter stick and make a plate to sit the shifter down inside the stock shifter hole.

put your leather boot over the shifter and it looks factory.

ive done it once or twice.

Thanks Craig K, But B ham is about a three hour drive from here in N.E. Corner Of Mississippi

Thanks for info.

The time has come to slip PA C4 Comp In

Thanks for all the info years ago folks!!!

And a special thanks for waypastcrazy (Clyde),
He bought me a 28oz flex plate and had it shipped to my house yesterday.
No questions asked, except one, confirm a 157 tooth count

All I like now to start is to have one of the torque convertor bolts welded back on
And put that baby in....