StreetStangs.net - Torque box kit

StreetStangs.net (http://www.streetstangs.net/forumindex.php)

- Chassis, Drivetrain, Suspension, Brakes & Tires (http://www.streetstangs.net/forumdisplay.php?f=19)

- - Torque box kit (http://www.streetstangs.net/showthread.php?t=12066)

blue90lx

06-05-2008 01:16 AM

Torque box kit

I have a upper and lower torque box kit from upr. I know that the rear seat and the rearend and all that has to come out. My ? is how hard is it to install these? Do you guys recommend welding both upper and lowers or just the uppers? Any feed back would be great. Thanks

1Quik85GT

06-05-2008 03:40 AM

welded it alll

QWKSNKE

06-05-2008 03:21 PM

Quote:

Originally Posted by 1Quik85GT (Post 152712)

welded it alll

+1...

sleepinggt

06-05-2008 04:35 PM

most people just weld up all the seams on the factory brackets etc where it was just tac welded from the factory and then put some reinforcement plates on the lowers

slvrbullit

06-10-2008 07:32 AM

I have the UPR kit and I welded up everything.

97cobrasvt

06-10-2008 03:54 PM

Quote:

Originally Posted by slvrbullit (Post 153136)

I have the UPR kit and I welded up everything.

Same here, if there was a spot to weld I welded it all.

ujslost

06-15-2008 08:30 AM

We installed these yesterday. Welding up the lowers in that small ass hole they fit in is going to be a bitch!

97cobrasvt

06-15-2008 08:57 PM

Quote:

Originally Posted by ujslost (Post 153528)

We installed these yesterday. Welding up the lowers in that small ass hole they fit in is going to be a bitch!

Let me say YYYYYYYEEESSSSSSSS it was:jester:

blue90lx

06-15-2008 09:15 PM

yeah that was a fun job last set i'll be doin for a while

All times are GMT -6. The time now is 07:30 AM.